Precision and AR Rifle Case (Gen-2)

From: $248.95

Free ShippingFree Shipping* / prime eligible

Fits Precision Rifle, AR15/AR10 Rifle & Pistol

  • Holds one Precision Rifle and one AR-15 or AR-10 Rifle, plus a semi-automatic pistol
  • Holds 1 rifle magazine & 2 pistol magazines
  • Accommodates all major scopes & optics that fall within the diagrams' dimensions
  • Fits angled foregrips, lasers, or flashlights mounted directly under the rail of the rifles
  • Max pistol length 8 5/8"
  • Does not accommodate side attachments or larger bipods on any of the firearms
  • Does not accommodate 26" Barrel Ruger Precision Rifles, such as the RPR Lapua Magnum
  • Compact design leaves no wasted space
  • 2 Hydro absorbent silica gel canisters included to help prevent rust
  • Comes with divider piece of foam to separate rifles from each other
  • Waterproof accessory box included for your small items
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Integrated wheels for easy transport
  • Case is Airline Approved for checked luggage
  • Gen-2 Upgrades Include:
    • Stainless steel added to padlock points for added security
    • Orange peel texture added to exterior finish to minimize scratches
    • Structural ribs added to outside of case for increased durability
    • 3rd handle added to wheel side for 2 person carry
    • Front handle length increased to help counter balance off center weighted loads
    • Wide bodied snap latches that can be used with gloves

Padlockable (with customer supplied padlock)

Description

Maximum Allowable AR15/AR10 Dimensions:

The Case Club Precision and AR Rifle Case is 2nd to none in terms of quality, convenience, and affordability. The precut foam will fit your Precision Rifle and AR15 or AR10 rifle as well as their optics. The base also holds a full size pistol and extra rifle & pistol magazines. The lid also includes a small waterproof accessory box. Velcro straps ensure the lid rifle does not move around while the case is in transit. The case comes with 2 silica gel canisters to help keep contents dry. Once the silica gel is saturated just pop it in the oven to cook out the moisture & use it again. The case itself is weatherproof, wheeled, dustproof, & has a built in pressure equalization valve for changing altitudes. It is heavy duty enough to ship or check on an airplane and can handle the abuse from TSA agents. Four built in heavy duty latches ensure nothing gets in or out. Padlockable holes are built right into the case, and can take standard sized padlocks so you can be guaranteed this case is safe & secure. The foam insert is closed cell military grade polyethylene which can be wiped clean if wet or oily. The foam is perforated above and below all of the firearm cutouts so you can remove the foam (with included knife) as needed to customize the insert for your unique optics and attachments. This case is compact, organized, uses all available space to the fullest, and won’t break the bank. Protect your investment, buy Case Club.

Product Specifications

Interior Dimensions50.30"L x 13.50"W x 5.00"H
(1,278mm x 343mm x 127mm)
Exterior Dimensions52.75"L x 16.00"W x 6.00"H
(1,340mm x 406mm x 152mm)
Shipping Weight30.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(13.61 kg)
CharacteristicsWaterproof, Shippable, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Rifle / Shotgun TypeAR Pistol, AR10 Rifle, AR15 (Short Barrel), AR15 Rifle, Precision Rifle, Ruger Precision Rifle, Savage 10BA, Savage 110BA
Pistol TypeFits Semi-Autos
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
Manufacturing OriginUnited States of America
Extended TitleFits Precision Rifle, AR15/AR10 Rifle & Pistol
Quantity of Long Guns2
Condition New | Refurbished
SKU 30-TT9B-RUIF

Precision and AR Rifle Case (Gen-2)'s Pre-cut Template

Precision and AR Rifle Case (Gen-2) - Videos

Case Club Precision & AR Rifle Case - Overview

Case Club Precision & AR Rifle Case - Overview - Video

Case Club Hydro Absorbent Silica Gel Video - Overview

Case Club Hydro Absorbent Silica Gel Video - Overview - Video

Customer Questions

  1. Answered by the admin It is possible, but important to know what you would be getting yourself into. The foam is of course cut in the profile of an AR15/AR10. Even if the shotgun is the same length it can be assumed the profile is different from the cutout which will require you to modify the foam to fit the shotgun. It is doable, but the Velcro straps may not perfectly line up nor will the overall insert be easy to make look professional. For those reasons, purchasing this case to work with a shotgun is not recommended.
  2. Answered by the admin

    Yes, the foam in the bottom does come precut. The image you saw was likely the one below which is showing the removable foam pad that sits on the bottom rifle so the two rifles don't touch when the case is closed. That piece is 1/2" thick and is completely removable.

    This case would not fit an AR in the bottom. For that setup please see our 2 AR Rifle Case which would fit an AR15/AR10 in the lid and the base.

  3. Answered by the admin Looking at the Sage International EBR chassis for the M1A, it looks a little too different than the case's rifle cutout to fit properly. The M1A and the EBR Chassis are untested in this case, but it looks like the extension rails of the stock, and the charging handle of the M1A, may present issues. Overall I do not suspect that the M1A with Sage International EBR chassis would work well in the case.
  4. Answered by the admin

    Please start by measuring the length of your rifles. If the Ruger Precision 6.5 Creedmoor does not exceed 50.57" long & the AR300 blackout does not exceed 42.40" long then this case would be the best choice. It is important to verify the dimensions of the rifles before purchasing the product to ensure a compatibility. If neither rifle exceeds those max dimensions then this case will work great.

  5. Q Can you purchase only the precision foam inserts? answer now
    Asked by Ching Yu on October 11, 2019 10:46 pm
    Answered by the admin

    Unfortunately, we don't sell the foam separate from the case.

  6. Answered by the admin

    Yes. This case can be ordered as a generic shipping case that has uncut foam. Be advised the foam layer thickness will be different then this case & there will be no Velcro straps in the lid, but rather generic convoluted foam. That version of the case can be found here: Long Universal Rifle Case

  7. Q Are you guys selling this exact case through Amazon? answer now
    Asked by Charles green on March 3, 2019 12:02 pm
    Answered by the admin Yes. You can purchase this case on Amazon here: Precision & AR Rifle Case
  8. Q Can a SCAR 17 fit in the AR location? answer now
    Asked by Greg on March 2, 2019 7:27 pm
    Answered by the admin

    If you are willing to make foam modifications with the included razor knife you could make it work. Be advised, not all the Velcro holes will line up. It looks like the Scar covers 2 of the Velcro exit points. Here is an illustration of what you would be working with. Colored lines are the template, black lines are the Scar. If you are handy and willing to spend the time it would work. If modifications are not something you would feel comfortable doing then I would advise against this product.

  9. Answered by the admin

    The Case Club Precision and AR Rifle Case can hold a .338 Lapua Magnum Ruger Precision Rifle provided the rifle does not exceed the specs of the "Maximum Dimensions" diagram. The rifle cutout may not perfectly hug the contours of the .338 as well as smaller Ruger Precision variations, but (as seen with the non-Ruger rifle images on the product page) the foam is built to accommodate slightly different shapes as well.

    The case can also hold up to two 5 round .338 Lapua Magnum magazines naturally in the bottom left pocket of the case. For 10 round .338 magazines, the user may need to remove the adjoining convolute foam in the lid of the case to free up some extra space.

  10. Q Do you ship to Austria / Europe? answer now
    Asked by Nok on January 28, 2019 11:00 am
    Answered by the admin

    The international shipping options were just updated for this product so it now can ship to Austria & Europe. Be advised the shipping cost will be expensive.

  11. Q Is there a pressure relief valve on this case? answer now
    Asked by J on January 18, 2019 6:58 pm
    Answered by the admin

    Yes, there is a pressure release valve located on the bottom of the case.

  12. Q Can I fit a M1A scout rifle in the precision rifle part of the case? answer now
    Asked by Brian P Sheaffer on November 5, 2018 4:19 pm
    Answered by the admin

    The M1A rifle will technically fit in the precision rifle area, but there will be extra space left over that could be considered awkward. Below is the M1A overlaid on the existing cutouts. The pink lines make up the M1A scout where as the black lines are the existing cuts already made in the foam. You will have to be the judge whether that is acceptable.

  13. Q Can you customize this case to be double 48" rifles? answer now
    Asked by CLAUDIOI FUNES on August 16, 2018 8:04 pm
    Answered by the admin

    This case can be customized to fit longer a longer rifle however any changes would be considered a custom foam insert which would increase the price. Custom foam generally adds about $200 extra to the product price which accommodates engineering time and machinery setup for a single case. If that is within budget feel free to reach out so we can guide you through the process: 877.412.2737

  14. Q can these cases be ordered without precut foam inserts? answer now
    Asked by Shane on July 11, 2018 6:52 am
    Answered by the admin

    They sure can. This case shell can be found here: https://www.caseclub.com/product/case-club-cc108187pl-case/

Send me a notification for each new answer.