2 AR Rifle Case (Gen-2)

$ 264.45

Fits 2 AR15 / AR10 Rifles & Pistol
  • Holds two AR-15 or AR-10 Rifles, and a semi-automatic pistol
  • Holds up to 5 standard or pmag (30-rd) magazines
  • Holds up to 3 extra pistol magazines
  • Fits an angled foregrip, laser or flashlight mounted directly under the rail of the rifle
  • Accommodates all major scopes & optics that fall within the diagrams' dimensions
  • Case is weatherproof & dustproof
  • Comes with a pressure release purge valve
  • Hydro absorbent silica gel canisters included to help prevent rust
  • Comes with divider piece of foam to separate rifles from each other
  • Waterproof accessory box included for your small items
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Integrated wheels for easy transport
  • Case is Airline Approved for checked luggage
  • Does not accommodate side attachments or larger bipods on any of the firearms
  • Gen-2 Upgrades Include:
    • Stainless steel added to padlock points for added security
    • Orange peel texture added to exterior finish to minimize scratches
    • Structural ribs added to outside of case for increased durability
    • 3rd handle added to wheel side for 2 person carry
    • Front handle length increased to help counter balance off center weighted loads
    • Wide bodied snap latches that can be used with gloves

Padlockable (with customer supplied padlock)

We accept Amazon Pay when purchasing 2 AR Rifle Case (Gen-2)

Description

Maximum Allowable AR15/AR10 Dimensions:

The Case Club 2 AR Rifle Case is 2nd to none in terms of quality, convenience, and affordability. In short, it is the best 2 AR Case on the market. The precut foam will fit up to two AR15 or AR10 rifles with up to 20″ barrels, as well as their optics. The base also holds a full size pistol and extra rifle & pistol magazine. The lid also includes a small waterproof accessory box. Velcro straps ensure the lid rifle does not move around while the case is in transit. The case comes with 2 silica gel canisters to help keep contents dry. Once the silica gel is saturated just pop it in the oven to cook out the moisture & use it again. The case itself is weatherproof, wheeled, dustproof, & has a built in pressure equalization valve for changing altitudes. It is heavy duty enough to ship or check on an airplane and can handle the abuse from TSA agents. Four built in heavy duty latches ensure nothing gets in or out. Padlockable holes are built right into the case, and can take standard sized padlocks so you can be guaranteed this case is safe & secure. The foam insert is closed cell military grade polyethylene which can be wiped clean if wet or oily. The foam is perforated above and below all of the firearm cutouts so you can remove the foam (with included knife) as needed to customize the insert for your unique optics and attachments. This case is compact, organized, uses all available space to the fullest, and won’t break the bank. Protect your investment, buy Case Club.

Additional Information

Interior Dimensions50.30"L x 13.50"W x 5.00"H
(1,278mm x 343mm x 127mm)
Exterior Dimensions52.75"L x 16.00"W x 6.00"H
(1,340mm x 406mm x 152mm)
Shipping Weight27.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(12.25 kg)
CharacteristicsWaterproof, Shippable, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Built in Locks (option), Pressure Equalization Valve
Rifle / Shotgun TypeAR Pistol, AR10 Rifle, AR15 (Short Barrel), AR15 Rifle
Pistol TypeFits Semi-Autos
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
Manufacturing OriginUnited States of America
Extended TitleFits 2 AR15 / AR10 Rifles & Pistol
Quantity of Long Guns2
Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Questions and answers of the customers

  1. Answered by the admin The lid foam is 1.625" thick. Be advised there is a plastic panel behind the foam in which the Velcro is threaded through. We use a lot of glue to adhere it to the lid so although not impossible to remove, it will be difficult.
  2. Answered by the admin

    45 degree sights are untested in this case however based on the thickness of the foam layers along with the loose divider piece separating the guns, it is unlikely 45 degree sights would fit.

  3. Answered by the admin

    Although the AR10 will fit in the lid or the base, the Tavor 7 is untested. Based on the shape of the Tavor when compared to the cutouts for the AR10, it looks like the Tavor 7 wouldn't fit. (At least not without heavy foam modification).

  4. Answered by the admin

    This configuration will not work with your Scar rifles. Technically the foam could be trimmed to fit the Scar 16 & Scar 17 however the main issue will be the charging handle. As you may know, the charging handles on Scars stick out quite a bit. The rifle in the lid would have an issue of not being able to sit flat while the charging handle of the rifle in the base will hit the rifle in the lid when closing the case.

  5. Answered by the admin

    If you removed the silica gel canister and manually cut a barrel extension into the foam, you could extend the upper rifle length to 48". You could extend it even further if you went past the magazine convolute area as well.

Send me a notification for each new answer.