AR10 Rifle Case (Gen-2)

$229.95

Free ShippingFree Shipping / prime eligible

Fits AR10 & Pistol

Compatible Firearms

  • AR10 Rifle (Max length of 40.9" with collapsible or fixed stock)
  • Semi-Auto Pistol

Compatible Rifle Accessories

  • Scope or Optic (within a 3.8" height)
  • Allows for a forward (vertical) grip, laser or flashlight mounted directly under or over the rail
  • Under Barrel Attachments
  • Over Barrel Attachments
  • Palm Shelf
  • Aftermarket Stock
  • Holds up to 2 standard or pmag (25-rd) magazines

Compatible Pistol Accessories

  • Under Barrel Attachment

Case Features

  • Comes with a pressure release purge valve
  • Compact design leaves no wasted space
  • Hydro absorbent silica gel canister included to help prevent rust
  • Waterproof accessory box included for your small items
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage

Gen-2 Upgrades Include

  • Stainless steel added to padlock points for added security
  • 2 edge wheels added so the case can roll
  • Orange peel texture added to exterior finish to minimize scratches
  • Structural ribs added to outside of case for increased durability
  • 2 handles added (one on each end)
  • Front handle length increased to help counter balance off center weighted loads
  • Wide bodied snap latches that can be used with gloves

Padlockable (with customer supplied padlock)

Out of stock

Accepted credit cards Amazon Pay available

Description

The Case Club AR10 rifle case is the best out there. The precut foam will fit AR10 rifles with a 20″ barrel & collapsible stock. The case will also hold your rifle magazines, full size or compact pistol, pistol magazine, silica gel canister (included), waterproof accessory box (also included), & more in the generic accessory pocket. The case itself is waterproof, dustproof, & has a built in pressure equalization valve for changing altitudes. It is heavy duty enough to ship or check on an airplane and can handle all the abuse from TSA agents. Four built in heavy duty latches ensure nothing gets in or out. Padlockable holes are also built right in, which can take standard sized masterlocks so you can be guaranteed this case is safe & secure. The foam insert is closed cell military grade polyethylene which can be wiped clean if wet or oily. The foam is perforated above and below the main AR10 cutout so you can remove the foam (with included knife!) as needed to customize the insert for your unique optics and attachments. The pistol cutout is also perforated so a full size fits just as snug as a compact. The two cutouts for the rifle magazines can hold either 10, 20 or 30 round regular or pmag magazines (223/556) or 5, 10, 20, or 25 regular .308 magazines. Reusable silica gel canister is included to remove moisture from within the case. Once the silica gel is saturated just pop it in the oven to cook out the moisture & use it again. A waterproof accessory box is also included, and it is perfect for storing your cleaning supplies and small tools. The lid holds a foam combination of convoluted (egg crate) & closed cell polyethylene, specifically engineered to hold everything down perfectly. This case is compact, organized, & uses all available space to the fullest.

AR10 Rifle Case - Specifications

Compatible Firearms

  • AR10 Rifle (Max length of 40.9" with collapsible or fixed stock)
  • Semi-Auto Pistol

Compatible Rifle Accessories

  • Scope or Optic (within a 3.8" height)
  • Allows for a forward (vertical) grip, laser or flashlight mounted directly under or over the rail
  • Under Barrel Attachments
  • Over Barrel Attachments
  • Palm Shelf
  • Aftermarket Stock
  • Holds up to 2 standard or pmag (25-rd) magazines

Compatible Pistol Accessories

  • Under Barrel Attachment

Case Features

  • Comes with a pressure release purge valve
  • Compact design leaves no wasted space
  • Hydro absorbent silica gel canister included to help prevent rust
  • Waterproof accessory box included for your small items
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage

Gen-2 Upgrades Include

  • Stainless steel added to padlock points for added security
  • 2 edge wheels added so the case can roll
  • Orange peel texture added to exterior finish to minimize scratches
  • Structural ribs added to outside of case for increased durability
  • 2 handles added (one on each end)
  • Front handle length increased to help counter balance off center weighted loads
  • Wide bodied snap latches that can be used with gloves

Additional Information

Interior Dimensions41.93"L x 13.56"W x 5.12"H
(1,065mm x 344mm x 130.048mm)
Exterior Dimensions44.25"L x 16.00"W x 6.25"H
(1,124mm x 406mm x 159mm)
Shipping Weight16.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(7.26 kg)
CharacteristicsWaterproof, Shippable, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Rifle / Shotgun TypeAR Pistol, AR10 Rifle, AR15 (Short Barrel), AR15 Rifle
Pistol TypeFits Semi-Autos
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
Manufacturing OriginUnited States of America
Extended TitleFits AR10 & Pistol
Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Questions and answers of the customers

  1. Answered by the admin

    Yes, this case will fit your M16A1 with carry handle.

  2. Q Will this case fit a Springfield Saint Victor .308 cal.? answer now
    Asked by jahightower69 on March 21, 2020 4:34 pm
    Answered by the admin

    Yes, this case will fit a Springfield Saint Victor .308.

  3. Q Will my FN SCAR 20s fit with large scope. answer now
    Asked by Mark on December 24, 2019 3:43 pm
    Answered by the admin

    The FN SCAR 20s will not fit into this case. We do not have a pre-made case that would fit the SCAR 20s.

  4. Q Can I purchase this case, but with a custom foam layout? answer now
    Asked by shaune on July 27, 2019 4:02 pm
    Answered by the admin

    We can definitely design and manufacturer a custom foam insert in this case shell (Case Club CC368891PL Case). If it is a gun case you need made and you are local to Anaheim, CA you would be welcome to bring your gear in. Otherwise we will need a tracing sent to us through the mail. If it is not a gun case, then you are welcome to send us all the gear or a tracing. Of course if you have CAD capabilities you can always send us a digital drawing through email as well. Please call or email us for more information. Compared to an off-the-shelf product such as this, pricing tends to be about double the cost.

  5. Q Can I purchase just the foam insert? answer now
    Asked by Robert Paquette on June 12, 2019 3:39 am
    Answered by the admin

    We currently do not sell the foam insert separate from the case.

  6. Answered by the admin Yes it will provided the overall length is less then 41.70", however the lower receiver on an AR15 is a little smaller then an AR10 so the fit will not be quite as precise. It will still work and function the way it should. Here is an example of an AR15 in the AR10 case.

Send me a notification for each new answer.