5 Pistol & Accessory Case (Gen-2)

From: $137.94

Free ShippingFree Shipping* / prime eligible

Semi-Autos Only

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

General Case Features

  • Holds 5 pistols and (up to) 30 magazines with magazine modules or 18 magazines with accessory pocket (+5 more in the magwells)
  • Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust
  • Case is 100% shippable and airline approved for TSA checked luggage
  • Two padlock points that support a customer supplied padlock with a 1/4" shackle
  • One way hinge pins ensure your gear remains safe and secure
  • Case has a lifetime warranty
  • 100% Waterproof (IP67) & Dustproof
  • Built-in pressure release valve
  • Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights
  • Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths
  • Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner
  • Wide bodied snap latches can be used with thick gloves
  • Extended front handle length helps counter balance off center weighted loads
  • All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
  • Fully ATA approved and compliant in all 50 states

Interior Foam Features

  • Easily convert the case from a 5 pistol & accessory version to a 5 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 26 while adding both modules increases it to 30. Quickly convert it back to the 5 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
  • Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
  • Magazine compartments are dual level & will fit both single & double stack mags of varying lengths
  • Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size
  • Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones

Description

The 5 Pistol & Accessory Case by Case Club holds 5 handguns and up to 30 additional magazines of various sizes. It is ideal for firearms training classes, police departments, gun enthusiasts, and anyone looking to transports their firearms. For those who need to transport & store their handgun safely, there is no better option than the 5 pistol & accessory case. This universal insert holds various sized pistols for versatility and convenience, and its quickdraw design allows for easy and fast access to the pistols. Extra cutouts in place hold six spare magazines, and allow for storage of extra items such as ear wear and eyewear. The foam is a tough military grade polyethylene that will hold up to constant use. The case itself is guaranteed for life against breakage & defects so you know your pistols will be safe for years and even decades to come. The case includes an ever-important moisture-absorbing silica gel to keep pistols rust free. Extra accessories for the case are recommended below, for those looking to further beef-up or monitor this excellent pistol case.

5 Pistol & Accessory Case (Gen 2) - Features

General Case Features

  • Holds 5 pistols and (up to) 30 magazines with magazine modules or 18 magazines with accessory pocket (+5 more in the magwells)
  • Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust
  • Case is 100% shippable and airline approved for TSA checked luggage
  • Two padlock points that support a customer supplied padlock with a 1/4" shackle
  • One way hinge pins ensure your gear remains safe and secure
  • Case has a lifetime warranty
  • 100% Waterproof (IP67) & Dustproof
  • Built-in pressure release valve
  • Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights
  • Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths
  • Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner
  • Wide bodied snap latches can be used with thick gloves
  • Extended front handle length helps counter balance off center weighted loads
  • All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
  • Fully ATA approved and compliant in all 50 states

Interior Foam Features

  • Easily convert the case from a 5 pistol & accessory version to a 5 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 26 while adding both modules increases it to 30. Quickly convert it back to the 5 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
  • Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
  • Magazine compartments are dual level & will fit both single & double stack mags of varying lengths
  • Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size
  • Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones

Product Specifications

Interior Dimensions17.80"L x 12.70"W x 6.50"H
(452mm x 323mm x 165.1mm)
Exterior Dimensions20.50"L x 15.50"W x 7.37"H
(521mm x 394mm x 187mm)
Shipping Weight10.20 LBS (estimated weight of the product with packaging such as a cardboard box)
(4.63 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareNo Wheels, Padlockable, Hinged Lid, Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodInjection Molded
Quantity of Pistols5
Pistol TypeFits Semi-Autos
Extended TitleSemi-Autos Only
Version Standard Version | Lighted Version

5 Pistol & Accessory Case (Gen-2) - Videos

5 Pistol & Accessory Case

5 Pistol & Accessory Case - Video

Case Club Hydro Absorbent Silica Gel Video - Overview

Case Club Hydro Absorbent Silica Gel Video - Overview - Video

Questions and answers of the customers

  1. Answered by the admin

    The total thickness inside the case is 6.5". However out of that 6.5" height, the lid takes up 1.5"  with convolute and the base takes up 0.5" at the bottom. Therefore usable space is just over 4.5". It is expected the guns and magazine will squish the lid foam, but your extended magazine will be too tall. If you purchased any of our gun cases it is likely the extended mags would not fit unless you modified the foam.

  2. Answered by the admin

    The padlock hole size is 0.3" diameter. Padlocks with 1/4" shackles will fit the best.

  3. Answered by the admin

    The case will be able to fit RMR sights and other small red dot sights. Medium sized red dot sights may become a bit tight and large sights such as Aimpoints will not fit.

Send me a notification for each new answer.