5 Pistol & Accessory Case (Gen-2)

Name: Case Club
Price range: $$

From: $137.94

Free Shipping* / prime eligible

Semi-Autos Only

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

General Case Features

Holds 5 pistols and (up to) 30 magazines with magazine modules or 18 magazines with accessory pocket (+5 more in the magwells)
Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust
Case is 100% shippable and airline approved for TSA checked luggage
Two padlock points that support a customer supplied padlock with a 1/4" shackle
One way hinge pins ensure your gear remains safe and secure
Case has a lifetime warranty
100% Waterproof (IP67) & Dustproof
Built-in pressure release valve
Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights
Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths
Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner
Wide bodied snap latches can be used with thick gloves
Extended front handle length helps counter balance off center weighted loads
All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
Fully ATA approved and compliant in all 50 states

Interior Foam Features

Easily convert the case from a 5 pistol & accessory version to a 5 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 26 while adding both modules increases it to 30. Quickly convert it back to the 5 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
Magazine compartments are dual level & will fit both single & double stack mags of varying lengths
Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size
Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones

Version

Standard Version

Lighted Version

Clear Selection

5 Pistol & Accessory Case (Gen-2) - Available at Amazon

Categories: 5 Pistol Cases, Case Club Cases, Gun Cases, Pistol Cases SKU: N/A

Description

The Case Club 5 Pistol & Accessory Case (Gen-2) is meticulously engineered to provide unparalleled protection for your firearms and accessories. Designed to securely house up to five semi-automatic pistols and up to 30 magazines, this case is ideal for enthusiasts and professionals seeking reliable storage and transport solutions.

Each pistol slot features custom-cut foam made from military-grade, closed-cell polyethylene. This material is both durable and non-abrasive, ensuring a snug fit that prevents movement and potential damage during transit. The universal insert accommodates full-size, compact, and subcompact semi-automatic pistols with under-barrel attachments and small reflex sights. However, it is not intended for revolvers or pistols exceeding 8 5/8″ in length.

The case is 100% waterproof (IP67 rated), dustproof, and crushproof, featuring a built-in pressure relief valve for air travel and a rechargeable silica gel canister to prevent moisture buildup. Additional features include two padlock-compatible holes with stainless steel reinforcements, robust snap latches operable with gloves, and an extended front handle for balanced carrying. The case is fully compliant with TSA guidelines for checked luggage, making it an excellent choice for both domestic and international travel.

An optional lighted version is available, providing enhanced visibility in low-light conditions.

Disclaimer: This case has been specifically designed and tested for most standard-sized semi-automatic pistols. Firearms with oversized optics, extended controls, or other non-standard modifications may not fit properly. For the best fit and protection, use this case with pistols that fall within the listed dimensional guidelines.

5 Pistol & Accessory Case (Gen 2) - Features

General Case Features

Holds 5 pistols and (up to) 30 magazines with magazine modules or 18 magazines with accessory pocket (+5 more in the magwells)
Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust
Case is 100% shippable and airline approved for TSA checked luggage
Two padlock points that support a customer supplied padlock with a 1/4" shackle
One way hinge pins ensure your gear remains safe and secure
Case has a lifetime warranty
100% Waterproof (IP67) & Dustproof
Built-in pressure release valve
Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights
Max length of pistols is 8 5/8" & is not intended for revolvers due to their longer barrel lengths
Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner
Wide bodied snap latches can be used with thick gloves
Extended front handle length helps counter balance off center weighted loads
All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
Fully ATA approved and compliant in all 50 states

Interior Foam Features

Easily convert the case from a 5 pistol & accessory version to a 5 pistol with increased magazine capacity version by adding/leaving in, the magazine modules. Adding 1 module increases magazine capacity to 26 while adding both modules increases it to 30. Quickly convert it back to the 5 pistol & accessory version anytime by removing the modules. Dual purpose foam design allows for three different configurations for the price of one!
Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
Magazine compartments are dual level & will fit both single & double stack mags of varying lengths
Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size
Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones

Product Specifications

Interior Dimensions	17.80"L x 12.70"W x 6.50"H (452mm x 323mm x 165.1mm)
Exterior Dimensions	20.50"L x 15.50"W x 7.37"H (521mm x 394mm x 187mm)
Shipping Weight	10.20 LBS (estimated weight of the product with packaging such as a cardboard box) (4.63 kg)
Characteristics	Waterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
Hardware	No Wheels, Padlockable, Hinged Lid, Pressure Equalization Valve
Case Material	Plastic
Manufacturing Method	Injection Molded
Quantity of Pistols	5
Pistol Type	Fits Semi-Autos
Extended Title	Semi-Autos Only
Version	Standard Version \| Lighted Version

Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Read more...

California Proposition 65

You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.

For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.

We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us.

5 Pistol & Accessory Case (Gen-2) - Videos

5 Pistol & Accessory Case

Case Club Hydro Absorbent Silica Gel Video - Overview

Customer Questions

Q Is the interior dimension of 6.5"H with or without foam inserts? Will extended magazines such as ... answer now
Asked by Alex on May 1, 2021 1:17 pm

Answered by the admin
The total thickness inside the case is 6.5". However out of that 6.5" height, the lid takes up 1.5" with convolute and the base takes up 0.5" at the bottom. Therefore usable space is just over 4.5". It is expected the guns and magazine will squish the lid foam, but your extended magazine will be too tall. If you purchased any of our gun cases it is likely the extended mags would not fit unless you modified the foam.
Q What is the diameter size of the holes for the locks and what is the maximum size shackle diamete... answer now
Asked by Alex Chow on May 1, 2020 11:01 am

Answered by the admin
The padlock hole size is 0.3" diameter. Padlocks with 1/4" shackles will fit the best.
Q Will this case fit handguns with a red dot sight on a glock 19 (compacts) or FN 508 (full size)? answer now
Asked by Jeremy on April 4, 2019 10:31 am

Answered by the admin
The case will be able to fit RMR sights and other small red dot sights. Medium sized red dot sights may become a bit tight and large sights such as Aimpoints will not fit.