4 Pistol & Accessory Case (Gen-2)

$109.20

Free ShippingFree Shipping / prime eligible

Semi-Autos Only

  • Comes with magazine modules that can be taken out to create an accessory pocket or left in place for magazine storage
  • Case will hold up to 4 pistols &...
    • 12 magazines with the magazine modules removed, or...
    • 21 magazines with 1 magazine module, or...
    • 29 magazines with both magazine modules
  • Case is high-strength polypropylene
  • Hydro absorbent silica gel canister included to help prevent rust
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage
  • Fits under-barrel attachments and small red dots
  • Quick draw design is compact and leaves no wasted space
  • Max length of pistols is 8 5/8"
  • Not intended for revolvers. (See our 4 Revolver & Accessory Case which properly fits revolvers)
  • Gen-2 upgrades include
    • Dual magazine modules that can be taken out for accessory storage or left in place for magazine storage
    • Length & height adjustment blocks built into the foam to for properly fitting compact and sub-compact guns
    • Wide bodied snap latches that can be used with gloves
    • Front handle length increased to help counter balance off center weighted loads
    • Orange peel texture added to exterior finish to minimize scratches
    • All latch pins, hinge pins, & handle pins upgraded from plastic to steel
    • Exterior structural ribs added for durability

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

SKU: ASSYCC181373ISKPIS4A Categories: , , ,
Accepted credit cards Amazon Pay available

Description

The 4 Pistol & Accessory Case by Case Club holds up to 4 handguns and 12 additional magazines without the magazine modules or 29 magazines with the modules. The case is ideal for those who need to transport & store their handguns, ear muffs, and safely glasses along with some boxes of ammo. The heavy duty, closed cell polyethylene foam is cut to allow for quick access to your guns and will hold up to constant use. The case shell is guaranteed for life against breakage & defects, so you know your pistols will be safe for years and even decades to come. The case includes a moisture-absorbing silica gel canister to keep the firearms rust free and is compliant with TSA baggage laws so it can be checked on an airplane. Used by the military & law enforcement personnel around the globe, Case Club cases are the toughest cases in the world.

Additional Information

Interior Dimensions18.29"L x 13.19"W x 6.62"H
(465mm x 335mm x 168.148mm)
Exterior Dimensions19.75"L x 15.53"W x 7.48"H
(502mm x 394mm x 190mm)
Shipping Weight11.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(4.99 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareNo Wheels, Padlockable, Hinged Lid, Built in Locks (option), Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodInjection Molded
Manufacturing OriginUnited States of America
Quantity of Pistols4
Pistol TypeFits Semi-Autos
Locks No Locks | Built in Metal Locks
Extended TitleSemi-Autos Only
Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

California Proposition 65

You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.

For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.

We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us.

Questions and answers of the customers

  1. Answered by the admin Technically the max length of the pistol is 8 5/8" however considering your gun is 9" which only 3/8" larger, it should still fit. The overall fit will be tighter to the point it may dig into the foam on the barrel and grip end, but it should still work.
  2. Answered by the admin The foam is definitely not heat-proof. Please ensure the guns are fully cooled off before putting them back in the foam.
  3. Answered by the admin

    Any padlock with a 1/4" shackle will do well.

  4. Answered by the admin

    Yes. Please purchase the Case Club CC720SE Case "With PE Flat Foam".

  5. Answered by the admin Please refer to our video instructions on how setup your case. (Setup starts at: 27 seconds in) https://www.youtube.com/watch?time_continue=27&v=0UmRaqIvORw&feature=emb_title
  6. Q What is the color of this case? Military Green or Black? answer now
    Asked by Michael on December 10, 2019 4:20 pm
    Answered by the admin

    This case is black.

  7. Answered by the admin

    No, the guns will not fit in this case while also stored in a silicone case/sleeve.

  8. Answered by the admin

    Although the dimensions are close and the foam would fit into the Case Club Case, don't count on it being a perfect fit. The Pelican case is slightly smaller and has different radius corners. The foam would have an air gap all the way around the edge as shown below. If you are okay with that, then it would work for you. Otherwise you would need to consider a different case.

  9. Q Will a Sig p320 full size with Romeo 1 sight fit in this case answer now
    Asked by Todd Owings on July 13, 2019 5:40 pm
    Answered by the admin Yes, a Sig p320 full size with Romeo 1 Sight will fit into this case.

Send me a notification for each new answer.