Springfield M1A Case (Gen-2)

$287.44

Free ShippingFree Shipping* / prime eligible

Fits M1A & Pistol

  • Holds a single factory Springfield M1A Scout Squad, SOCOM 16, Standard, Loaded, National Match, Super Match, or Garand Rifle
  • Not meant to fit Springfield M1A CQB stock
  • Holds up to six 10 round magazines, or three 20 round magazines
  • Accommodates all major optics mounted either in the forward position or above the rear sight
  • Perforated cutouts allow for a mounted bipod
  • Case is shippable
  • Comes with a built-in pressure release purge valve
  • Case design leaves no wasted space
  • Hydro absorbent silica gel canister included to help prevent rust
  • Waterproof accessory box included for your small items
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Integrated wheels for easy transport
  • Case is Airline Approved for checked luggage
  • Gen-2 Upgrades Include:
    • Stainless steel added to padlock points for added security
    • Orange peel texture added to exterior finish to minimize scratches
    • Structural ribs added to outside of case for increased durability
    • 3rd handle added to wheel side for 2 person carry
    • Front handle length increased to help counter balance off center weighted loads
    • Wide bodied snap latches that can be used with gloves

Padlockable (with customer supplied padlock)

In stock

Categories: , , , SKU: ASSYCC108187PLM1A

Description

The Case Club Springfield M1A Rifle Case is the most versatile and toughest M1A Case that there is. For those looking to upgrade from their factory M1A bag to a hard case, there is no better option. The precut foam will fit Springfield M1A SOCOM 16, Scout Squad, Standard, Loaded, National Match, Super Match, M21, M25, and Garand rifles. The case will also hold your rifle magazines, full size or compact pistol, pistol magazine, silica gel canister (included), waterproof accessory box (also included), & more in the generic accessory pocket. The case itself is weatherproof, wheeled, dustproof, & has a built in pressure equalization valve for changing altitudes. It is heavy duty enough to check on an airplane and can handle all the abuse from TSA agents. Four built in heavy duty latches ensure nothing gets in or out. Padlockable holes are also built right in, which can take standard sized Masterlocks so you can be guaranteed this case is safe & secure. The foam insert is closed cell military grade polyethylene which can be wiped clean if wet or oily. The foam is perforated above and below the main M1A’s cutout so you can remove the foam (with included knife) as needed to customize the insert for your unique optics and attachments. The pistol cutout is also perforated so a full size fits just as snug as a compact. The two cutouts for the rifle magazines can hold either four 10 round magazines or two 20 round magazines. Reusable silica gel canister is included to remove moisture from within the case. Once the silica gel is saturated just pop it in the oven to cook out the moisture & use it again. A waterproof accessory box is also included, and it is perfect for storing your cleaning supplies and small tools. The lid holds a foam combination of convoluted (egg crate) & closed cell polyethylene, specifically engineered to hold everything down perfectly. This case is compact, organized, & uses all available space to the fullest.

Springfield M1A Case - Features

Compatible Firearms

  • Springfield M1A Scout Squad Rifle
  • Springfield M1A SOCOM 16 Rifle
  • Springfield M1A Standard Rifle
  • Springfield M1A Loaded Rifle
  • Springfield M1A National Match Rifle
  • Springfield M1A Super Match Rifle
  • Springfield M21 Rifle
  • Springfield M25 Rifle
  • Springfield M1A Grand Rifle
  • Semi-Auto Pistol

Compatible Rifle Accessories

  • Scope or Optic
  • Bipod
  • M1A Loaded Stocks

Compatible Pistol Accessories

  • Under Barrel Attachment

Product Specifications

Interior Dimensions50.30"L x 13.50"W x 5.00"H
(1,278mm x 343mm x 127mm)
Exterior Dimensions52.75"L x 16.00"W x 6.00"H
(1,340mm x 406mm x 152mm)
Shipping Weight29.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(13.15 kg)
CharacteristicsWaterproof, Shippable, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Rifle / Shotgun TypeRuger 10/22, Ruger Mini-14, Springfield M1 Garand, Springfield M1A Loaded, Springfield M1A National Match, Springfield M1A Standard, Springfield M1A Super Match, Springfield Scout Rifle, Springfield SOCOM Rifle
Pistol TypeFits Semi-Autos
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
Manufacturing OriginUnited States of America
Extended TitleFits M1A & Pistol
SKU ASSYCC108187PLM1A

Springfield M1A Case (Gen-2)'s Pre-cut Template

Springfield M1A Case (Gen-2) - Videos

Case Club Springfield M1A Case (Gen-2) - Overview

Case Club Springfield M1A Case (Gen-2) - Overview - Video

Case Club Hydro Absorbent Silica Gel Video - Overview

Case Club Hydro Absorbent Silica Gel Video - Overview - Video

Customer Questions

  1. Answered by the admin Good observation and thank you for bringing that to our attention. It looks like the magazine capacity was increased when the case was upgraded to a Gen-2, but as you suspected the description was not updated. *The image is correct and we have updated the product description to compliment it.
  2. Answered by the admin

    Although the Beretta BM59 remains untested in this case, it does look like it would fit the non-collapsible stock version. At this time we cannot recommend the folding stock version as the foam is definitely not setup for that. However if you were to purchase this case (for the non-folding stock variant) you could expect the foam to fit the majority of the rifle out of the box. Be advised you would need to be prepared to make minor foam cuts (with the included razor knife) to ensure a perfect fit in the event not all the existing cuts lined up such as the front sight or sling clip. Assuming you were alright with making those types of modifications (which should be minor), then this case would work for your Beretta BM59.

  3. Answered by the admin

    This case will come with the foam already pre-cut to fit different variations of the M1A including the M1 Garand. 99% of the cuts have already been professionally made, but you will likely have to connect a few of the perforations for the last 1%. This case does come with a razor blade to make those perforations and most people find those final manual cuts to be very simple. You can expect your M1 Garand to fit snugly within the cutouts as shown below. The image is not perfectly to scale, but should give you an idea of what to expect. As you can see there is additional room both above and below the rifle if you need to adjust for optics or accessories.

    Answering your questions more directly: If you wanted to avoid any manual cuts on your end, we can always custom cut the foam for your exact rifle, but the cost is rather expensive when compared to this off-the-shelf product. So yes, you could order this case with custom foam that fits the Original M1 Garand without you needing to modify it, but it will cost more money. (Generally over double the cost). Feel free to reach out if interested in going that route & we would be happy to advise further. 877.412.2737

  4. Q Will this case accommodate the factory installed Archangel stocks? answer now
    Asked by Bill Ving on February 18, 2019 8:15 pm
    Answered by the admin

    Yes. This case will fit the factory installed Archangel stock. Simply use the included razor knife to connect the pre-cut perforations shown below.

Send me a notification for each new answer.