4 Pistol Case (Gen-2)

Name: Case Club
Price range: $$

From: $120.69

Free Shipping* / prime eligible

Semi-Autos Only

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Case Features

Holds 4 pistols, 16 magazines (+4 more in the magwells)
Comes rechargeable moisture-absorbing silica gel canister to help prevent gun rust
100% shippable and airline approved for TSA checked luggage
Two metal reinforced padlock points that support a customer supplied padlock with a 0.3" shackle
One way hinge pins ensure your gear remains safe and secure
100% Waterproof (IP67) & Dustproof
Built-in pressure release valve
Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
Magazine compartments are dual level & will fit both single & double stack mags of varying lengths
Specially designed magazine spacers for your single stack mags
Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights
Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit
Max length of pistols is 8 5/8" & is not intended for revolvers
Easily convert the case from a 4 pistol version to a 3 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear
Quickly convert it back to the 4 pistol version anytime by putting the module back in
Dual purpose foam design allows for two different configurations for the price of one!
Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner
Wide bodied snap latches can be used with thick gloves
Extended front handle length helps counter balance off center weighted loads
All latch & hinge pins are stainless steel
Injected molded case shell with integrated exterior structural ribs increase durability
Compliant in all 50 states

Version

Standard Version

Lighted Version

Clear Selection

4 Pistol Case (Gen-2) - Available at Amazon

Categories: 4 Pistol Cases, Case Club Cases, Gun Cases, Pistol Cases SKU: ASSYCC540SEPIS4

Description

The Case Club 4 Pistol Case provides secure, compact storage for four semi-automatic pistols and up to 16 magazines. Each firearm is housed in custom-cut closed-cell foam, precision-engineered to fit standard pistols with a maximum overall length of 8 5/8 inches. The durable, hard-sided case is waterproof, dustproof, and impact-resistant, featuring locking holes, a pressure relief valve, and reinforced latches. This case is not intended for revolvers. An optional lighted version is available for improved interior visibility in low-light conditions.

Disclaimer: This case has been specifically designed and tested for most standard-sized semi-automatic pistols. Firearms with oversized optics, extended controls, or other non-standard modifications may not fit properly. For the best fit and protection, use this case with pistols that fall within the listed dimensional guidelines.

4 Pistol Case - Features

Case Features

Holds 4 pistols, 16 magazines (+4 more in the magwells)
Comes rechargeable moisture-absorbing silica gel canister to help prevent gun rust
100% shippable and airline approved for TSA checked luggage
Two metal reinforced padlock points that support a customer supplied padlock with a 0.3" shackle
One way hinge pins ensure your gear remains safe and secure
100% Waterproof (IP67) & Dustproof
Built-in pressure release valve
Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
Magazine compartments are dual level & will fit both single & double stack mags of varying lengths
Specially designed magazine spacers for your single stack mags
Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights
Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit
Max length of pistols is 8 5/8" & is not intended for revolvers
Easily convert the case from a 4 pistol version to a 3 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear
Quickly convert it back to the 4 pistol version anytime by putting the module back in
Dual purpose foam design allows for two different configurations for the price of one!
Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner
Wide bodied snap latches can be used with thick gloves
Extended front handle length helps counter balance off center weighted loads
All latch & hinge pins are stainless steel
Injected molded case shell with integrated exterior structural ribs increase durability
Compliant in all 50 states

Product Specifications

Interior Dimensions	14.60"L x 10.50"W x 6.00"H (371mm x 267mm x 152.4mm)
Exterior Dimensions	16.75"L x 12.62"W x 6.75"H (425mm x 321mm x 171mm)
Shipping Weight	7.50 LBS (estimated weight of the product with packaging such as a cardboard box) (3.40 kg)
Characteristics	Waterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
Hardware	No Wheels, Padlockable, Hinged Lid, Pressure Equalization Valve
Case Material	Plastic
Manufacturing Method	Precision Cut, Injection Molded
Quantity of Pistols	4
Pistol Type	Fits Semi-Autos
Extended Title	Semi-Autos Only
Version	Standard Version \| Lighted Version
SKU	ASSYCC540SEPIS4

Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Read more...

California Proposition 65

You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.

For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.

We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us.

4 Pistol Case (Gen-2) - Videos

Case Club 4 Pistol Case (Upgraded Gen 2)

Case Club Hydro Absorbent Silica Gel Video - Overview

Lighted Case Setup & Operating Instructions

Customer Questions

Q Can this hold microcompact pistols such as the Ruger LCP max and Micro 9mm such as the Sig P365? answer now
Asked by Jackson on December 6, 2023 11:04 am

Answered by the admin
Yes however be prepared to use the foam spacers to properly fit those smaller guns. Just be sure to review the video to better understand how the spacers work. You will need to cut the foam spacers smaller before putting them back in, but the task is straightforward, quick and easy.
Q I am considering your 3 pistol and 4 pistol case, but am surprised that the lock holes only fit a... answer now
Asked by John Poris on September 11, 2022 9:10 pm

Answered by the admin
Both cases will fit a larger (full size) shackle, but the lock will not hang down naturally. The shackle would be somewhat pressure fitted in the hole, but it would work. Furthermore you can definitely drill it out for a more natural fit.

The reason we don't actively promote that (aside from the tight fit), is any tool that could break the smaller lock, could be used to cut the case plastic instead. A bigger lock could help visually deter thieves, but keep in mind the case is plastic and cutting the case with a power tool would be much easier then worrying about the lock. If you need better security, a safe is recommended over a case.
Q What size shackle will fit in your cases? Is it standard sizing across the board or does it vary ... answer now
Asked by daniel on March 26, 2020 12:02 am

Answered by the admin
The padlock hole diameter on this particular case is 0.3". The hole diameter will vary from case to case however generally speaking larger cases will fit larger padlocks.
Q How do I know which foam to remove and how? What's a captacha? answer now
Asked by Guy Zents on December 29, 2019 5:07 pm

Answered by the admin
Please take a look at our YouTube video. It will guide you on how to remove the foam and configure it to your unique weapons. If you have questions beyond what the video answers feel free to call us (877.412.2737) and we would be happy to guide you the rest of the way.
(https://www.youtube.com/watch?v=NFCIjMCNIy4)

https://www.youtube.com/watch?v=NFCIjMCNIy4

A captacha is not related to the product. It is simply a mechanism built into our website to ensure real people ask questions and internet bots don't spam our website.
Q This mentions a maximum length of 8 5/8 inches for the semi-autos. Where on the pistol should thi... answer now
Asked by Walt on December 3, 2019 11:58 am

Answered by the admin
From the tip of the barrel to the back of the hammer/beaver tail.
Q I’m looking for a case to hold 2 pistols with 6 magazines. answer now
Asked by Michael on October 15, 2019 6:52 am

Answered by the admin
Please consider our 2 Pistol & Accessory Case.
Q Do you make a foam insert that holds 3 pistols and 1 revolver (including mags, etc)? answer now
Asked by Brent Queck on April 14, 2019 4:19 pm

Answered by the admin
Yes. Please refer to either our 4 revolver case or our 4 revolver & accessory case. Both will hold revolvers and semi-auto pistols. Also, they both have “hidden” magazine cutouts that can be removed (after tearing small perforations) to hold semi-auto magazines. (One case has 8 mag slots & the other has 10 which are specified on their product pages).

*In fact most of our revolver cases actually have "hidden" pre-scored magazine slots as well. If you only carry revolvers, leave the cutouts in place and no one will know they are there. If you carry both, remove them and covert your case into a revolver/semi-auto hybrid case.
Q I am interested in only purchasing the four pistol insert. I do not need the case only the insert. answer now
Asked by Robert Ross on September 24, 2018 2:56 pm

Answered by the admin
The foam insert for this 4 pistol case is not available for purchase without the case. We apologize for the inconvenience.
Q I'm looking for a case to hold 3 or 4 pistols 10" in length (6" barrel). answer now
Asked by Andrea on September 12, 2018 5:46 am

Answered by the admin
Please refer to our revolver cases which will work for your 10" long firearms. Our revolver cases are made to fit both large revolvers and semi-autos with longer barrels. Any one of our revolver cases will work. but here is a quick link to our 3 & 4 revolver cases as requested.