4 Pistol & Accessory Case (Gen-2)

$126.44

Free ShippingFree Shipping* / prime eligible

Semi-Autos Only

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Case Features

  • Comes with magazine modules that can be taken out to create an accessory pocket or left in place for magazine storage
  • Case is high-strength polypropylene
  • Hydro absorbent silica gel canister included to help prevent rust
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage
  • Fits under-barrel attachments and small red dots
  • Quick draw design is compact and leaves no wasted space
  • Max length of pistols is 8 5/8"
  • Not intended for revolvers. (See our 4 Revolver & Accessory Case which properly fits revolvers)

Case will hold up to 4 pistols &...

  • 12 magazines with the magazine modules removed, or...
  • 21 magazines with 1 magazine module, or...
  • 29 magazines with both magazine modules

Gen-2 upgrades include

  • Dual magazine modules that can be taken out for accessory storage or left in place for magazine storage
  • Length & height adjustment blocks built into the foam to for properly fitting compact and sub-compact guns
  • Wide bodied snap latches that can be used with gloves
  • Front handle length increased to help counter balance off center weighted loads
  • Orange peel texture added to exterior finish to minimize scratches
  • All latch pins, hinge pins, & handle pins upgraded from plastic to steel
  • Exterior structural ribs added for durability

In stock

4 Pistol & Accessory Case (Gen-2) - Available at Amazon
Categories: , , , SKU: ASSYCC181373ISKPIS4A
4 Pistol & Accessory Case (Gen-2)
PIS4A-TOP-(FULL-MAG)
PIS4A-TOP-(HALF-MAG)
PIS4A-OR-PIS5-TOP-(ACCESSORY-FILLED)
PIS4A-OR-PIS5-LOW-RIGHT-(ACCESSORY-FILLED)
HX-5020-PRESSURE-RELIEF-VALVE
20200530_100314
20200530_102053
20200530_091654
20200530_100050
20200530_1036255

Description

The Case Club 4 Pistol & Accessory Case is a compact, rugged storage solution built to carry up to four semi-automatic pistols along with additional magazines and gear. Its hard-sided shell offers durable, impact-resistant protection, while the interior features precision-cut, closed-cell foam tailored to securely cradle each firearm. This form-fitting foam minimizes movement and shields sensitive parts from shock or abrasion. Designed to fit standard pistol dimensions, it accommodates a variety of sizes including models with small under-barrel attachments or optics. Ideal for travel, range use, or secure storage, this case balances portability and protection for users who require dependable firearm organization.

Disclaimer: This case has been specifically designed and tested for most standard-sized semi-automatic pistols. Firearms with oversized optics, extended controls, or other non-standard modifications may not fit properly. For the best fit and protection, use this case with pistols that fall within the listed dimensional guidelines.

4 Pistol & Accessory Case (Gen-2) - Features

Case Features

  • Comes with magazine modules that can be taken out to create an accessory pocket or left in place for magazine storage
  • Case is high-strength polypropylene
  • Hydro absorbent silica gel canister included to help prevent rust
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage
  • Fits under-barrel attachments and small red dots
  • Quick draw design is compact and leaves no wasted space
  • Max length of pistols is 8 5/8"
  • Not intended for revolvers. (See our 4 Revolver & Accessory Case which properly fits revolvers)

Case will hold up to 4 pistols &...

  • 12 magazines with the magazine modules removed, or...
  • 21 magazines with 1 magazine module, or...
  • 29 magazines with both magazine modules

Gen-2 upgrades include

  • Dual magazine modules that can be taken out for accessory storage or left in place for magazine storage
  • Length & height adjustment blocks built into the foam to for properly fitting compact and sub-compact guns
  • Wide bodied snap latches that can be used with gloves
  • Front handle length increased to help counter balance off center weighted loads
  • Orange peel texture added to exterior finish to minimize scratches
  • All latch pins, hinge pins, & handle pins upgraded from plastic to steel
  • Exterior structural ribs added for durability

Product Specifications

Interior Dimensions18.29"L x 13.19"W x 6.62"H
(465mm x 335mm x 168.148mm)
Exterior Dimensions19.75"L x 15.53"W x 7.48"H
(502mm x 394mm x 190mm)
Shipping Weight10.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(4.54 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareNo Wheels, Padlockable, Hinged Lid, Built in Locks (option), Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodInjection Molded
Manufacturing OriginUnited States of America
Quantity of Pistols4
Pistol TypeFits Semi-Autos
Locks No Locks | Built in Metal Locks
Extended TitleSemi-Autos Only
SKU ASSYCC181373ISKPIS4A

4 Pistol & Accessory Case (Gen-2) - Videos

Case Club 4 Pistol & Accessory Case (Upgraded Gen 2) - Overview

Case Club 4 Pistol & Accessory Case (Upgraded Gen 2) - Overview - Video

Case Club Hydro Absorbent Silica Gel Video - Overview

Case Club Hydro Absorbent Silica Gel Video - Overview - Video

Customer Questions

  1. Q New York State recently enacted new legislation for the transport of firearms : "For purposes of ... answer now
    Asked by Laura Iwan on September 5, 2022 1:28 pm
    Answered by the admin Like most gun laws, this is written in a vague way. Full disclosure... The case is plastic and therefore will melt in a fire given enough time. However one could argue the case will protect in a fire better then a cardboard box or no box at all, but then again not as good as an actual fireproof safe. Probably not the answer you were hoping for, but it's up to a lawyer to determine what the criteria is "fire resistant" as nothing could be more vague.
  2. Q Is this case TSA approved? answer now
    Asked by Noah on July 22, 2022 10:32 am
    Answered by the admin

    Yes, this case is TSA approved.
  3. Q Will this case fit a pistol with an overall length of 9inches (HK VP9 with compensator)? answer now
    Asked by John E on December 23, 2020 11:02 pm
    Answered by the admin Technically the max length of the pistol is 8 5/8" however considering your gun is 9" which only 3/8" larger, it should still fit. The overall fit will be tighter to the point it may dig into the foam on the barrel and grip end, but it should still work.
  4. Q Is the foam heat-proof or will it melt when putting hot guns back in the case? answer now
    Asked by Kevin Anderson on November 1, 2020 12:58 pm
    Answered by the admin The foam is definitely not heat-proof. Please ensure the guns are fully cooled off before putting them back in the foam.
  5. Q What is the best lock to put on the case to fit the predrilled holes and still tilt up for a comb... answer now
    Asked by CHARLES D STINSON on June 11, 2020 5:39 am
    Answered by the admin

    Any padlock with a 1/4" shackle will do well.
  6. Q Can this come with uncut foam so I can cut to fit a pistol with a folding stock? answer now
    Asked by James Koski on March 14, 2020 6:17 pm
    Answered by the admin

    Yes. Please purchase the Case Club CC720SE Case "With PE Flat Foam".
  7. Q Where do I find instructions for removing the foam to put the guns in, I have the four pistol and... answer now
    Asked by Dave George on December 20, 2019 8:22 am
    Answered by the admin Please refer to our video instructions on how setup your case. (Setup starts at: 27 seconds in) https://www.youtube.com/watch?time_continue=27&v=0UmRaqIvORw&feature=emb_title
  8. Q What is the color of this case? Military Green or Black? answer now
    Asked by Michael on December 10, 2019 8:20 am
    Answered by the admin

    This case is black.
  9. Q I currently have my pistols stored in Bore-Stores silicone cases. Will my guns fit inside the foa... answer now
    Asked by Hamilton Truong on October 25, 2019 1:09 am
    Answered by the admin

    No, the guns will not fit in this case while also stored in a silicone case/sleeve.
  10. Q I own a Case Club 4 pistol and accessory case. I recently purchased two additional pistols and wa... answer now
    Asked by Jesse Verdin on September 5, 2019 11:54 am
    Answered by the admin

    Although the dimensions are close and the foam would fit into the Case Club Case, don't count on it being a perfect fit. The Pelican case is slightly smaller and has different radius corners. The foam would have an air gap all the way around the edge as shown below. If you are okay with that, then it would work for you. Otherwise you would need to consider a different case.
  11. Q Will a Sig p320 full size with Romeo 1 sight fit in this case answer now
    Asked by Todd Owings on July 13, 2019 10:40 am
    Answered by the admin Yes, a Sig p320 full size with Romeo 1 Sight will fit into this case.

Send me a notification for each new answer.

Related products

Optional Accessories …