Desert Tech SRS A1, SRS A1 Covert, and HTI Rifle Case (Gen-2)

Name: Case Club
Price range: $$

$252.95

Free Shipping*

Padlockable (with customer supplied padlock)

Compatible Firearms

Desert Tech SRS A1 Rifle
Desert Tech SRS A1 Covert Rifle
Desert Tech HTI Rifle (Barrel Removed)

Compatible Rifle Accessories

3 SRS magazines and 2 HTI Magazines
Scope or Optic within a 3.5" height
Bipod
Foregrip
Extra Barrel (in lid secured by Velcro straps)
Bolt must be removed from rifle when in case. Case has 2 designated bolt slots

Case Features

Compact design leaves no wasted space
Hydro absorbent silica gel canister included to help prevent rust
Foam insert is (closed cell) military grade polyethylene which can be wiped clean
Case is Airline Approved for checked luggage
9mm extendable cutting blade included for easy modifications for your specific setup

Gen-2 Upgrades Include

Stainless steel added to padlock points for added security
2 edge wheels added so the case can roll
Orange peel texture added to exterior finish to minimize scratches
Structural ribs added to outside of case for increased durability
2 handles added (one on each end)
Front handle length increased to help counter balance off center weighted loads
Wide bodied snap latches that can be used with gloves

Categories: Case Club Cases, Gun Cases, Rifle Cases SKU: ASSYCC368891PLDTSRSHTI

Desert Tech SRS A1, SRS A1 Covert, and HTI Rifle Case (Gen-2)

Description

The Case Club Desert Tech SRS A1, SRS A1 Covert, and HTI Rifle Case (Gen-2) features custom fabricated foam inserts precisely cut to fit and protect the Desert Tech SRS A1 Covert HTI rifle and its components. The foam interior ensures secure immobilization and superior impact protection for your rifle during transport and storage. Built with durable, crush-resistant materials, the case offers reliable defense against external damage while maintaining a compact, covert profile. It includes provisions for secure locking and easy handling. The custom foam layout accommodates 3 SRS magazines and 2 HTI magazines, a scope or optic up to 3.5″ in height, a bipod, foregrip, and an extra barrel secured in the lid with Velcro straps. The bolt must be removed from the rifle when stored in the case, with 2 designated bolt slots provided.

Protect your investment, buy Case Club.

Disclaimer: This case has been specifically designed and tested for the Desert Tech SRS A1 Covert HTI rifle. Firearms with oversized optics, extended controls, or other non-standard modifications may not fit properly. For the best fit and protection, use this case with rifles that fall within the listed dimensional guidelines.

Desert Tech SRS A1, SRS A1 Covert, and HTI Rifle Case - Features

Compatible Firearms

Desert Tech SRS A1 Rifle
Desert Tech SRS A1 Covert Rifle
Desert Tech HTI Rifle (Barrel Removed)

Compatible Rifle Accessories

3 SRS magazines and 2 HTI Magazines
Scope or Optic within a 3.5" height
Bipod
Foregrip
Extra Barrel (in lid secured by Velcro straps)
Bolt must be removed from rifle when in case. Case has 2 designated bolt slots

Case Features

Compact design leaves no wasted space
Hydro absorbent silica gel canister included to help prevent rust
Foam insert is (closed cell) military grade polyethylene which can be wiped clean
Case is Airline Approved for checked luggage
9mm extendable cutting blade included for easy modifications for your specific setup

Gen-2 Upgrades Include

Stainless steel added to padlock points for added security
2 edge wheels added so the case can roll
Orange peel texture added to exterior finish to minimize scratches
Structural ribs added to outside of case for increased durability
2 handles added (one on each end)
Front handle length increased to help counter balance off center weighted loads
Wide bodied snap latches that can be used with gloves

Product Specifications

Interior Dimensions	41.93"L x 13.56"W x 5.12"H (1,065mm x 344mm x 130.048mm)
Exterior Dimensions	44.25"L x 16.00"W x 6.25"H (1,124mm x 406mm x 159mm)
Shipping Weight	25.00 LBS (estimated weight of the product with packaging such as a cardboard box) (11.34 kg)
Characteristics	Waterproof, Shippable, Crushproof, Outdoor Use
Hardware	Wheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Case Material	Plastic
Manufacturing Method	Precision Cut, Injection Molded
Manufacturing Origin	United States of America
Rifle / Shotgun Type	Desert Tech HTI, Desert Tech SRS A1, Desert Tech SRS A1 Covert
SKU	ASSYCC368891PLDTSRSHTI

Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Read more...

California Proposition 65

You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.

For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.

We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us.

Desert Tech SRS A1, SRS A1 Covert, and HTI Rifle Case (Gen-2)'s Pre-cut Template

Customer Questions

Q Can yiou give me the measurements of the general accessories pocket? I am thinking i could use th... answer now
Asked by Mike on October 24, 2024 5:33 am

Answered by the admin
As requested, the accessory pocket size is: 13.44"L x 2.30"W x 2.75"H. Unfortunately we would not be able to modify the design unless you were ordering higher quantities.
Q Is there any where that a suppressor can be added in the case? I would prefer to keep it on the b... answer now
Asked by John on November 22, 2022 1:06 pm

Answered by the admin With the existing cutouts, there is no specific place for the suppressor. If you were able to make this case work, you definitely would not be able to keep it on the barrel. The best option you have with this case is to remove it & store it in the accessory pocket. I will add that all the foam plugs are shipped with the case, so theoretically you could modify that particular plug to fit the suppressor and put it back in if you desire a snug fit.
Q if the HTI only fits with the barrel removed, is there a spot for the 29" barrel? answer now
Asked by jacob on December 9, 2021 12:16 am

Answered by the admin Yes. There is a spot in the lid for the barrel. (you can see it in the photo close to the hinge).
Q Is the Dessert Tech SRS A1 included? answer now
Asked by Jona on October 6, 2019 5:10 pm

Answered by the admin
The rifle is not included nor are the rifle accessories.
Q How deep is the lid, is there room to cut another slot for a third barrel and recess it enough as... answer now
Asked by Ed on August 26, 2019 7:15 am

Answered by the admin
The lid is 1.5" deep however there is foam and plastic glued behind the barrel that leaves only 1" extra for the current barrel to sit in. Based on that math, there is not enough space in the lid to hold 2 barrels in the same cutout. However answering your question more directly, there is room for a second barrel cutout in the lid right above the first barrel. We considered adding that feature to this product, but quickly learned the weight of the barrel is heavy enough that it naturally finds slack in the Velcro (if not fastened tightly) and often sags out of the pocket a bit. With the current barrel position, that is not a problem when it happens as it does not overlap the rifle in a noticeable way. With that said a second barrel could be added to the lid under some circumstances and work just fine, but we decided to play it safe for the general consumer and omit that second extra barrel to ensure nobody's gear was jeopardized from user error. We would be happy to make you a custom foam insert to accommodate another barrel if required however the cost would go up.
Q Do you have a case that doesn't require the bolt to be removed? Do you have a cutout set up that ... answer now
Asked by Timmie on August 12, 2019 7:20 pm

Answered by the admin
For this case the bolt must come out of the gun. Leaving the bolt in makes the overall width of the rifle too thick to the point this case would not be able to shut. We opted to go this route so the case could be thinner and more compact for the user. We don't currently have any other version of this case. If certain cutouts are not used you could retrofit them for other uses. Otherwise if this case doesn't meet your needs we can always manufacturer you a custom foam insert using your choice of case. Of course the cost will be more and if the bolt stays in the gun you can expect the case size to be larger.
Q Will the new Desert Tech SRS A2 fit in this case? answer now
Asked by Dean on August 8, 2019 4:31 am

A Desert Tech SRS A2 fits in the case with out any trouble. The new 80lbs torque wrench that ships from Desert Tech, for barrel installation, does not fit into its designated location. Too much of the new handle sticks up for the case to shut.
Q Can I have this srsa1 custom foam put into a Pelican case? answer now
Asked by mark c plattner on May 2, 2019 1:28 am

Answered by the admin
All of our foam inserts including this one can be put into a Pelican case (or any other case for that matter). The main hurdle to consider when going this route is the cost. You would be looking at double or triple the price due to the fact your case would be a one off and Pelican cases are more expensive. If you would like to more information please email sales@caseclub.com.