Kel-Tec KSG & Std. Mfg. Co. DP-12 Shotgun Case (Gen-2)

$ 229.95

Fits Shotgun & Pistol
  • Fits Kel-Tec KSG (Original, Compact, or Tactical) or Standard Manufacturing Co. DP-12 Shotgun
  • Allows for a forward (vertical) grip
  • Allows for optics, lasers, flashlights, and sights mounted on the top rail
  • Allows for side attachments on either side of the KSG shotgun
  • Allows for side attachments on LEFT SIDE ONLY for the DP-12 Shotgun (left side meaning the shotgun's left side from perspective of the shooter while aiming)
  • Fits up to 44 shot shells in the shot shell trays, or the trays can be removed to utilize foam cavities as generic accessory pockets
  • Fits almost any semi-automatic pistol, with up to 4 extra pistol magazines
  • Case is 100% Waterproof, & Dustproof
  • Compact design leaves no wasted space
  • High-Impact resistant injection molded plastic
  • Hydro absorbent silica gel canister included to help prevent rust
  • Waterproof accessory box included for your small items
  • Foam insert is pre-cut closed cell military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage
  • Does NOT fit KSG25
  • Gen-2 Upgrades Include:
    • Stainless steel added to padlock points for added security
    • 2 edge wheels added so the case can roll
    • Orange peel texture added to exterior finish to minimize scratches
    • Structural ribs added to outside of case for increased durability
    • 2 handles added (one on each end)
    • Front handle length increased to help counter balance off center weighted loads
    • Wide bodied snap latches that can be used with gloves

Padlockable (with customer supplied padlock)

Case has a Lifetime Warranty

We accept Amazon Pay when purchasing Kel-Tec KSG & Std. Mfg. Co. DP-12 Shotgun Case (Gen-2)


The Case Club Pre-Made DP-12 & KSG Shotgun Case is the the only case on the market that custom fits the Kel-Tec KSG or the Standard Manufacturing Company DP-12 bullpup shotgun right out of the box. The case additionally fits almost any semi-auto pistol, spare shot shells, pistol magazines, a silica gel canister (included), waterproof accessory box (also included), & more in the generic accessory pocket. The foam can accommodate optics and underbarrel attachments on the shotgun and the pistol, so a wide variety of unique setups will still fit. The case itself is waterproof, dustproof, & has a built in pressure equalization valve for changing altitudes. It is heavy duty enough to ship or check on an airplane and can handle all the abuse from TSA agents. Five built in heavy duty latches ensure nothing gets in or out. Padlockable holes are also built right in, which can take standard sized padlock so you can be guaranteed this case is safe & secure. The foam insert is closed cell military grade polyethylene which can be wiped clean if wet or oily. The foam is perforated above and below the main shotgun cutout so you can remove the foam (with included knife) as needed to customize the insert for your unique optics and attachments. The pistol cutout is also perforated so a full size fits just as snug as a compact. The shot shell trays can hold up to a combined 44 individual shells for your convenience, or the shelves can be removed to utilize the foam space as a more generic accessory pocket. A reusable silica gel canister is included to remove moisture from within the case. Once the silica gel is saturated just pop it in the oven to cook out the moisture & use it again. A waterproof accessory box is also included, and it is perfect for storing your cleaning supplies and small tools. The lid holds a foam combination of convoluted (egg crate) & closed cell polyethylene, specifically engineered to hold everything down perfectly. This case is compact, organized, & uses all available space to the fullest. Protect your investment, buy Case Club.

Additional Information

Interior Dimensions35.81"L x 13.81"W x 5.31"H
(910mm x 351mm x 134.874mm)
Exterior Dimensions38.50"L x 16.50"W x 6.00"H
(978mm x 419mm x 152mm)
Shipping Weight16.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(7.26 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Rifle / Shotgun TypeKel-Tec KSG, Standard Mfg. Co. DP-12
Pistol TypeFits Semi-Autos
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
Manufacturing OriginUnited States of America
Extended TitleFits Shotgun & Pistol
Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm -

Questions and answers of the customers

  1. Q Do you have a case specifically made for the DP-12 the works? answer now
    Asked by Scott Wolkoff on June 8, 2020 5:43 am
    Answered by the admin

    We don't have a specific case made for the DP-12 "the works". This is the only case we currently have for the DP-12 which should fit "the works".

  2. Answered by the admin The case only allows for left side attachments, whereas the DP-12 The Works #2 shotgun appears (from the factory at least) to have a flashlight and a laser on the right side of the gun. If the user switches the right side attachments to the left side, and additionally makes a small foam incision (with the case's provided knife) for the bottom-front rail, then the firearm will fit.
  3. Q I lost my keys. Can i get new ones? answer now
    Asked by Landon on April 21, 2019 9:10 am
    Answered by the admin

    Yes. Please email and we would be happy to send you new keys. A small charge will apply.

  4. Q What is the weight of the case? answer now
    Asked by coqueto4life on March 16, 2019 3:41 am
    Answered by the admin

    This case weighs 15 lbs.

Send me a notification for each new answer.