Bullpup Rifle Case

$ 199.95

Fits Bullpup & Pistol
Pre-Made foam fits these factory bullpup rifles:
IWI Tavor X95, SAR, TAR-21
Kriss Vector
Desert Tech SRS-A1 Covert
Desert Tech MDR, MDRX
Kel Tec RFB
Steyr AUG
FNH PS90, P90
Berretta CX4 Storm
Above rifles must still fall within constraints of above “Max Dimension” diagram
Holds up 4 standard or pmag (30-rd) magazines (and one PS90 Mag)
Max length of rifle is 33.09″
Allows for a forward (vertical) grip, laser or flashlight mounted under the barrel
Accommodates all major scopes & optics within a 3.68″ height
Fits almost any semi-automatic pistol, with pistol magazines
Case is 100% Waterproof, & Dustproof
Comes with a pressure release purge valve
Compact design leaves no wasted space. (Outside Case Dims. 40.00″L x 16.00″W x 5.50″D)
High-Impact resistant injection molded plastic
Hydro absorbent silica gel canister included to help prevent rust
Waterproof accessory box included for your small items
Foam insert is (closed cell) military grade polyethylene which can be wiped clean
Case is padlockable
Comes with 2 locking latches and a set of keys
Case is Airline Approved for checked luggage
Manufactured in America

Padlockable (with customer supplied padlock)

16 in stock


The Case Club Pre-Made Bullpup Rifle Case is the the only case on the market that right out of the box custom fits a variety of popular bullpup rifles. The precut foam will fit a factory IWI Tavor X95, SAR, TAR-21, Kriss Vector, Desert Tech (DT) SRS-A1 Covert, DT MDR, MDRX, Kel Tec RFB, Steyr Aug, FNH PS90, P90, or Ruger CX4 Storm, that falls within the “Maximum Dimensions” specs. It also fits almost any semi-auto pistol, spare rifle magazines, pistol magazines, a silica gel canister (included), waterproof accessory box (also included), & more in the generic accessory pocket. The foam can also accommodate optics and underbarrel attachments on the rifle, and underbarrel attachments on the pistol. The case itself is waterproof, dustproof, & has a built in pressure equalization valve for changing altitudes. It is heavy duty enough to ship or check on an airplane and can handle all the abuse from TSA agents. Five built in heavy duty latches ensure nothing gets in or out. Two latches are even keyed for extra security (set of keys included). Padlockable holes are also built right in, which can take standard sized Masterlocks so you can be guaranteed this case is safe & secure. The foam insert is closed cell military grade polyethylene which can be wiped clean if wet or oily. The foam is perforated above and below the main Bullpup Rifle’s cutout so you can remove the foam (with included knife) as needed to customize the insert for your unique optics and attachments. The pistol cutout is also perforated so a full size fits just as snug as a compact. The rifle magazine cutouts can hold either 10, 20 or 30 round regular or pmag magazines (with a special PS90 magazine cutout beneath the rifle stock). Reusable silica gel canister is included to remove moisture from within the case. Once the silica gel is saturated just pop it in the oven to cook out the moisture & use it again. A waterproof accessory box is also included, and it is perfect for storing your cleaning supplies and small tools. The lid holds a foam combination of convoluted (egg crate) & closed cell polyethylene, specifically engineered to hold everything down perfectly. This case is compact, organized, & uses all available space to the fullest.

Additional Information

Interior Dimensions37.00"L x 13.00"W x 5.12"H
(940mm x 330mm x 130.048mm)
Exterior Dimensions40.00"L x 16.00"W x 5.50"H
(1,016mm x 406mm x 140mm)
Shipping Weight16.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(7.26 kg)
CharacteristicsWaterproof, Shippable, Crushproof, Outdoor Use
HardwareNo Wheels, Padlockable, Hinged Lid, Built in Locks (option), Pressure Equalization Valve
Rifle / Shotgun TypeDesert Tech MDR, MDRX, Desert Tech SRS A1 Covert, FNH PS90, P90, IWI Tavor (X95, SAR, TAR-21), Kel Tec RFB, Kriss Vector, Ruger CX4 Storm, Steyr AUG
Pistol TypeFits Semi-Autos
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
Manufacturing OriginUnited States of America
Extended TitleFits Bullpup & Pistol
Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Questions and answers of the customers

  1. Answered by the admin

    The FN P90 or PS90 will fit, but there will be wasted space.

  2. Answered by the admin

    The Steyr AUG with a 20" barrel and the integrated 3x scope will indeed fit into this case.

  3. Answered by the admin

    No rifle selection is necessary. This product will be delivered, ready to go for your Kriss Vector. By removing the existing cutouts your Kriss Vector SBR will immediately fit. You can further customize the fit by trimming the foam pieces to a more exact shape based on your setup/gear. I have highlighted below the outline of a Kriss Vector SBR overlaid on the existing cutouts. It should give you an accurate idea on what foam trimming is needed. It depends on what gear you have, but from the look of it, I would expect a little trimming in the stock area & in the barrel area (to shorten the cutout length to the SBR)

  4. Answered by the admin

    Although still not built for a Sig Sauer MPX, Our MP5 Case would be a closer starting fit to your MPX Rifle, complete with slots that hold 4 magazines (similar in shape to MPX magazines). Some minor modifications still might need to be cut for the perfect fit. For a completely custom foam option, we would need either a tracing of the rifle and parts, or (if you are local to us in Anaheim, Ca) the items themselves. The custom route has increased costs (~$325) and lead times (~2 weeks) compared to our pre-made options, but please feel free to call 877-412-2737 any time M-F 8:00 am -4:30 pm PST to talk to a sales associate for up-to-date pricing.

  5. Answered by the admin Rifles that are not listed as compatible have not been tested within this case, so although it is possible they may fit, we generally advise against that assumption. Custom foam inserts are a great option for this situation. We just need either the rifle itself or a tracing of the rifle.

Send me a notification for each new answer.