3 Pistol & Accessory Case (Gen-2)

Name: Case Club
Price range: $$

From: $114.94

Free Shipping* / prime eligible

Semi-Autos Only

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Case Features

Comes with magazine modules that can be taken out to create an accessory pocket or left in place for magazine storage
Case is high-strength polypropylene
Hydro absorbent silica gel canister included to help prevent rust
Foam insert is (closed cell) military grade polyethylene which can be wiped clean
Case is Airline Approved for checked luggage
Fits under-barrel attachments and small red dots
Quick draw design is compact and leaves no wasted space
Max length of pistols is 8 5/8"
Not intended for revolvers. (See our 4 Revolver & Accessory Case which properly fits revolvers)

Case will hold up to 3 pistols &...

9 magazines with the magazine modules removed, or...
17 magazines with 1 magazine module, or...
23 magazines with both magazine modules

Gen-2 upgrades include

Dual magazine modules that can be taken out for accessory storage or left in place for magazine storage
Length & height adjustment blocks built into the foam to for properly fitting compact and sub-compact guns
Wide bodied snap latches that can be used with gloves
Front handle length increased to help counter balance off center weighted loads
Orange peel texture added to exterior finish to minimize scratches
All latch pins, hinge pins, & handle pins upgraded from plastic to steel
Exterior structural ribs added for durability

Version

Standard Version

Lighted Version

Clear Selection

3 Pistol & Accessory Case (Gen-2) - Available at Amazon

Categories: 3 Pistol Cases, Case Club Cases, Gun Cases, Pistol Cases SKU: ASSYCC171163ISKPIS3A

Description

The Case Club 3 Pistol & Accessory Case is a rugged, hard-sided case designed to securely store and transport three semi-automatic pistols, each up to 8 5/8 inches in length, along with up to 23 additional magazines of various sizes and essential accessories. This case is not intended for revolvers. The interior features custom-cut closed-cell polyethylene foam inserts that precisely cradle each firearm and magazine to prevent shifting and protect against impact, abrasion, and moisture. The foam is water-resistant, non-abrasive, and easy to clean, ensuring lasting protection for your gear.

This case is waterproof, dustproof, and crushproof, built to withstand tough conditions and rough handling. Reinforced latches ensure a secure closure while the built-in pressure equalization valve helps balance internal pressure changes during air travel. The case also includes lockable hasps to enable additional security measures. Its compact form factor makes it easy to carry and store without compromising internal space. For low-light environments, a lighted version of this case is available to enhance interior visibility.

Disclaimer: This case has been specifically designed and tested for most standard-sized semi-automatic pistols. Firearms with oversized optics, extended controls, or other non-standard modifications may not fit properly. For the best fit and protection, use this case with pistols that fall within the listed dimensional guidelines.

3 Pistol & Accessory Case - Features

Case Features

Comes with magazine modules that can be taken out to create an accessory pocket or left in place for magazine storage
Case is high-strength polypropylene
Hydro absorbent silica gel canister included to help prevent rust
Foam insert is (closed cell) military grade polyethylene which can be wiped clean
Case is Airline Approved for checked luggage
Fits under-barrel attachments and small red dots
Quick draw design is compact and leaves no wasted space
Max length of pistols is 8 5/8"
Not intended for revolvers. (See our 4 Revolver & Accessory Case which properly fits revolvers)

Case will hold up to 3 pistols &...

9 magazines with the magazine modules removed, or...
17 magazines with 1 magazine module, or...
23 magazines with both magazine modules

Gen-2 upgrades include

Dual magazine modules that can be taken out for accessory storage or left in place for magazine storage
Length & height adjustment blocks built into the foam to for properly fitting compact and sub-compact guns
Wide bodied snap latches that can be used with gloves
Front handle length increased to help counter balance off center weighted loads
Orange peel texture added to exterior finish to minimize scratches
All latch pins, hinge pins, & handle pins upgraded from plastic to steel
Exterior structural ribs added for durability

Product Specifications

Interior Dimensions	14.60"L x 10.50"W x 6.00"H (371mm x 267mm x 152.4mm)
Exterior Dimensions	16.75"L x 12.62"W x 6.75"H (425mm x 321mm x 171mm)
Shipping Weight	9.00 LBS (estimated weight of the product with packaging such as a cardboard box) (4.08 kg)
Characteristics	Waterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
Hardware	No Wheels, Padlockable, Hinged Lid, Pressure Equalization Valve
Case Material	Plastic
Manufacturing Method	Injection Molded
Quantity of Pistols	3
Pistol Type	Fits Semi-Autos
Extended Title	Semi-Autos Only
Version	Standard Version \| Lighted Version
SKU	ASSYCC171163ISKPIS3A

Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Read more...

California Proposition 65

You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.

For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.

We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us.

3 Pistol & Accessory Case (Gen-2) - Videos

3 Pistol & Accessory Case (Gen-2)

Case Club Hydro Absorbent Silica Gel Video - Overview

Lighted Case Setup & Operating Instructions

Customer Questions

Q Can I get this case in yellow? answer now
Asked by Mark Hines on June 17, 2022 1:23 pm

Answered by the admin
Negative. This case is only offered in black.
Q Can the "3 Pistol & Accessory Case (Gen-2)" be used as a check in baggage for a flight with t... answer now
Asked by Edwin Tanjuaquio on April 6, 2022 10:48 pm

Answered by the admin Yes. This case is heavy duty and 100% TSA compliant. Just be sure to bring 2 padlocks so you can lock it before checking it.
Q I see the max gun length and height but am wondering if gun isn't max length can it be a little t... answer now
Asked by Alan on July 23, 2020 2:11 pm

Answered by the admin It sounds like your thought is, if the gun length is shorter theoretically it might be less tall and could fit. Here is your definite answer... If you put the gun on your table so the barrel and grip are touching, what is the measurement from the table top to the top of the gun? This case is physically 6" in height on the inside. If you are coming in under 6" than it would be tight, but should work. If you are over 6" still than nothing you could do would make this gun fit as the physical case is just not deep enough.
Q Will trigger locked handguns fit in the case? answer now
Asked by Vinh on May 4, 2020 11:56 pm

Answered by the admin
No, trigger locked handguns will not fit in this case. The trigger lock is too wide.
Q Can this case fit extended mags? answer now
Asked by Quinten Broeckx on September 4, 2019 11:42 am

Answered by the admin
This particular case is on the thinner side and would not hold extended magazines. Some of our larger pistol cases which are deeper such as the 8 pistol case as one example could hold extended mags.
Q What is the difference between Case Club and the Pelican? answer now
Asked by Dr Kevin Flythe on August 20, 2019 11:04 am

Answered by the admin The Case Club case meets all the same mil-specs as the Pelican (waterproof, automatic purge valve, ect). In fact the latches on the Case Club are easier on your fingers then the Pelican. The main difference is simply the name and some customers in the market would prefer to pay more for that name which is why we currently have that option.
Q I’m interested in the 3 pistols plus accessories case. Can you offer this set up using a better q... answer now
Asked by Serge on July 23, 2019 2:31 pm

Answered by the admin
This gun case is only offered in this configuration. Be advised, it is waterproof with a lifetime warranty. It also meets all military specifications for a reusable, chemical resistant shipping case. From a quality standpoint is top of the line.