22-36 Graded Comic Book Slab Collector Case

$169.95

Free ShippingFree Shipping* / prime eligible

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Case Fits

  • 22 Comic Book Slabs Separated, or
  • up to 36 Comic Book Slabs Touching (after cutting out the separator tabs), or
  • up to 224 Loose Comic Books (not in slabs), or
  • A combination of any configuration above

Foam Design Options

  • Remove all the foam plugs for standard (separated) slab storage (qty 22)
  • Cut the finger separators off for increased slab capacity if you don't mind the slabs touching each other (qty 36)
  • Insert the foam spacers (on the sidewall and bottom) to instead securely hold loose comic books (qty 224)
  • Cut the foam spacers smaller and insert select bottom spacers to hold both slabs & loose comic books at the same time
  • Complete customization based on your unique setup

Case Features

  • Case is 100% shippable and airline approved for TSA checked luggage
  • Two padlock points that support a customer supplied padlock with a 1/4" shackle
  • 100% Waterproof (IP67) & Dustproof
  • Wide bodied snap latches can be used with thick gloves
  • All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
  • Fully ATA and TSA approved and compliant in all 50 states
  • Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil

Please Note

  • The case will weigh 35 lbs fully loaded, with the slabs separated
  • The case will weigh 52+ lbs fully loaded, with the slab separators cut out and the slabs touching
  • The case does NOT have wheels, so it is most ideal for shipping to tradeshows, long term storage, or short distance walking transport
  • Slab slot dimensions: 13.25" x 0.65" x 8"
  • *Comic books & slabs depicted are not included

In stock

22-36 Graded Comic Book Slab Collector Case - Available at Amazon
Categories: , , Tags: , , , , SKU: CC5026HXYWCOMICS
22-36 Graded Comic Book Slab Collector Case
Top View
Knife
Comic Book Case Half
Half
Closed Main View
Closed Side View
Closed Top View
Closed Handle View

Description

The Case Club 22-36 Graded Comic Book Slab Collector Case is engineered to provide maximum protection and organization for graded comic book slabs. Designed with precision-cut, closed-cell polyethylene foam, this case safely secures 22 to 36 standard-sized graded comic slabs in a layout that minimizes movement and impact.

The hard-sided shell offers excellent durability and structural integrity, making it ideal for storage at home or safe transport to conventions, sales, or exhibitions. Each slab rests in a custom-fit slot that prevents shifting, scratching, or corner damage, even when the case is in motion.

This case is built for serious collectors who need a trusted storage and travel solution for larger comic book slab quantities—without compromising on protection, portability, or presentation.

Case will weigh 35 lbs fully loaded with the slabs separated, and will weigh 52+ lbs fully loaded with the slab separators cut out and the slabs touching. The case does not have wheels, so it is most ideal for shipping to tradeshows, long term storage, or short distance walking transport. The slab slot dimensions are 13.25″ x 0.65″ x 8″.

Disclaimer: Graded comic book slabs not included. Compatible with standard-sized certified comic book holders.

 

22-36 Graded Comic Book Slab Collector Case - Features

Case Fits

  • 22 Comic Book Slabs Separated, or
  • up to 36 Comic Book Slabs Touching (after cutting out the separator tabs), or
  • up to 224 Loose Comic Books (not in slabs), or
  • A combination of any configuration above

Foam Design Options

  • Remove all the foam plugs for standard (separated) slab storage (qty 22)
  • Cut the finger separators off for increased slab capacity if you don't mind the slabs touching each other (qty 36)
  • Insert the foam spacers (on the sidewall and bottom) to instead securely hold loose comic books (qty 224)
  • Cut the foam spacers smaller and insert select bottom spacers to hold both slabs & loose comic books at the same time
  • Complete customization based on your unique setup

Case Features

  • Case is 100% shippable and airline approved for TSA checked luggage
  • Two padlock points that support a customer supplied padlock with a 1/4" shackle
  • 100% Waterproof (IP67) & Dustproof
  • Wide bodied snap latches can be used with thick gloves
  • All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
  • Fully ATA and TSA approved and compliant in all 50 states
  • Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil

Please Note

  • The case will weigh 35 lbs fully loaded, with the slabs separated
  • The case will weigh 52+ lbs fully loaded, with the slab separators cut out and the slabs touching
  • The case does NOT have wheels, so it is most ideal for shipping to tradeshows, long term storage, or short distance walking transport
  • Slab slot dimensions: 13.25" x 0.65" x 8"
  • *Comic books & slabs depicted are not included

Product Specifications

Interior Dimensions21.62"L x 13.81"W x 11.31"H
(549mm x 351mm x 287.274mm)
Exterior Dimensions24.00"L x 17.00"W x 12.00"H
(610mm x 432mm x 305mm)
Shipping Weight14.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(6.35 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareNo Wheels, Padlockable, Hinged Lid
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
SKU CC5026HXYWCOMICS

22-36 Graded Comic Book Slab Collector Case - Videos

22-36 Graded Comic Book Slab Collector Case

22-36 Graded Comic Book Slab Collector Case - Video

Customer Questions

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

Related products

Optional Accessories …