Tactical Shotgun Case (Gen-2)

$252.95

Free ShippingFree Shipping* / prime eligible

Fits Shotgun & Pistol

Padlockable (with customer supplied padlock)

Case Features

  • Holds a single tactical style shotgun with collapsible or fixed stock
  • 3 built in accessory pockets for gear and ammunition
  • Max length of shotgun is 40.60"
  • Allows for a forward (vertical) grip, laser or flashlight mounted directly under or over the rail
  • Accommodates all major (shotgun) optics within a 2.82" height
  • Comes with a pressure release purge valve
  • Compact design leaves no wasted space
  • Hydro absorbent silica gel canister included to help prevent rust
  • Waterproof accessory box included for your small items
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage

Gen-2 Upgrades Include:

  • Stainless steel added to padlock points for added security
  • 2 edge wheels added so the case can roll
  • Orange peel texture added to exterior finish to minimize scratches
  • Structural ribs added to outside of case for increased durability
  • 2 handles added (one on each end)
  • Front handle length increased to help counter balance off center weighted loads
  • Wide bodied snap latches that can be used with gloves

In stock

Categories: , , SKU: ASSYCC368891PLTACSHOT

Description

The Case Club tactical shotgun case is designed to hold tactical (non sporting) shotguns made for police, military and self defense. The precut foam accommodates shotguns with or without pistol grip. Additional perforations in the foam allow for various optics, lasers or lights. The foam will fit guns with fixed or collapsible stocks. Three accessory pockets can hold anything from safety gear to extra shells. A pistol cutout is also included for your backup side arm. The perforations are made in a way that will keep either a compact or full size handgun in place and snug. As an added bonus the case also comes with a waterproof accessory box for small items and a reusable silica gel canister to remove moisture from within the case. The case itself is waterproof and has four heavy duty clamp style latches and a manual purge valve located on the bottom of the case. Whether you need a shotgun case for storage or one to transport across state lines this is the best tactical shotgun case on the market.

Tactical Shotgun Case (Gen-2) - Features

Case Features

  • Holds a single tactical style shotgun with collapsible or fixed stock
  • 3 built in accessory pockets for gear and ammunition
  • Max length of shotgun is 40.60"
  • Allows for a forward (vertical) grip, laser or flashlight mounted directly under or over the rail
  • Accommodates all major (shotgun) optics within a 2.82" height
  • Comes with a pressure release purge valve
  • Compact design leaves no wasted space
  • Hydro absorbent silica gel canister included to help prevent rust
  • Waterproof accessory box included for your small items
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage

Gen-2 Upgrades Include:

  • Stainless steel added to padlock points for added security
  • 2 edge wheels added so the case can roll
  • Orange peel texture added to exterior finish to minimize scratches
  • Structural ribs added to outside of case for increased durability
  • 2 handles added (one on each end)
  • Front handle length increased to help counter balance off center weighted loads
  • Wide bodied snap latches that can be used with gloves

Product Specifications

Interior Dimensions41.93"L x 13.56"W x 5.12"H
(1,065mm x 344mm x 130.048mm)
Exterior Dimensions44.25"L x 16.00"W x 6.25"H
(1,124mm x 406mm x 159mm)
Shipping Weight25.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(11.34 kg)
CharacteristicsWaterproof, Shippable, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Rifle / Shotgun TypeShotgun (Tactical)
Case MaterialPlastic
Manufacturing MethodInjection Molded
Extended TitleFits Shotgun & Pistol
SKU ASSYCC368891PLTACSHOT

Tactical Shotgun Case (Gen-2)'s Pre-cut Template

Tactical Shotgun Case (Gen-2) - Videos

Tactical Shotgun Case (Gen-2)

Tactical Shotgun Case (Gen-2) - Video

Case Club Hydro Absorbent Silica Gel Video - Overview

Case Club Hydro Absorbent Silica Gel Video - Overview - Video

Questions and answers of the customers

  1. Answered by the admin Yes it will. However be advised; if the side saddle is on the bottom side, you will have to carve out the foam below the shotgun to make it fit. Alternatively if it is on the top side, the convoluted foam in the lid should naturally compress enough to accommodate it.
  2. Answered by the admin

    Yes, your shotgun will fit. The max length allowed is 40.60". Your shotgun is 40.125" so it does fall within the max dimension allowed.

  3. Q Will this fit the SDS Lynx-12? answer now
    Asked by William Evans on September 14, 2020 4:52 pm
    Answered by the admin This case will not fit a SDS Lynx-12. We do not have a pre-cut case for the SDS Lynx-12 yet.
  4. Q Will this fit a KS7 with the carry handle removed? answer now
    Asked by Bannon on May 6, 2020 9:25 am
    Answered by the admin

    No, this case will not fit the KS7 however please refer to our Kel-Tec KSG & Std. Mfg. Co. DP-12 Shotgun Case which will fit the KS7.

  5. Q Will this fit a Benelli M4 with a 7 round magazine? answer now
    Asked by Jim Beckham on March 5, 2020 10:11 am
    Answered by the admin

    Assuming you are referring to the 7 round extended tube, (that installs underneath & parallel to the barrel), then this case would appear to work. You will need to confirm the tube does not extend past the barrel once installed (which based on some quick research it doesn't appear to).

  6. Answered by the admin

    We do not sell the foam separate from the case.

Send me a notification for each new answer.