DJI Phantom 4 Case

$ 212.70

Fits the DJI Phantom 4 Drone, Phantom 4 Pro, Phantom 4 Pro+, or Phantom 4 Pro V2 with Props on
Cutouts in lid for propellers ensure props do not bend while case is closed (unlike competitor cases!).
2 (reusable) silica gel canisters included in the lid to remove moisture
Foam holds the Phantom 4 with the propellers on or off (gimbal & camera attached)
Extra propellers can be stored in the the long pocket next to the drone
Insert is equipped to hold 5 extra batteries along with a battery relief for the actual drone
Propellers on the drone are held in place with precision cut plastic protruding from the foam
A cutout above the drone fits all major tablets (up to 12″x7″x1/2″) including the ipad air & ipad mini
Two large accessory pockets on the right and bottom have removable plastic dividers for versatility
Remote control cutout fits Phantom 4, Phantom 4 Pro, or Phantom 4 Pro+, or Phantom 4 Pro V2 remote
Small slots hold SD cards nicely, organized and well protected
A softer foam pad below the drone is included which supports the gimbal and camera
Case is airline approved for checked luggage
Wheels & extension handle built in for easy transport
Foam is closed cell military grade polyethylene which can be wiped clean
Case will float in water even if fully packed
Patent pending design manufactured by Case Club
Drone and accessories depicted in pictures are not included

Padlockable (with customer supplied padlock)

Case has a Lifetime Warranty

We accept Amazon Pay when purchasing DJI Phantom 4 Case

Description

The DJI Phantom 4 Wheeled Drone Case by Case Club is designed to hold the DJI Phantom 4 Drone, Phantom 4 Pro, Phantom 4 Pro Plus, or Phantom 4 Pro V2 along with various accessories. The case comes with a lifetime warranty and will vastly improve organization for your drone. The case features a watertight o-ring seal which will keep all moisture & debris out. A tote-handle and wheel system will ensure easy transport, especially through airports. It is ideal for storing your drone with equipment safely while traveling, and highly recommended for both professionals and hobbyists alike. Protect your investment, buy Case Club.

Additional Information

Interior Dimensions22.24"L x 13.66"W x 8.49"H
(565mm x 347mm x 215.646mm)
Exterior Dimensions23.97"L x 16.00"W x 10.10"H
(609mm x 406mm x 257mm)
Shipping Weight17.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(7.71 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodInjection Molded
Manufacturing OriginUnited States of America
Drone ModelDJI Phantom 4, DJI Phantom 4 Pro, DJI Phantom 4 Pro Plus
Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Questions and answers of the customers

  1. Q Is there a manual to setup this case? answer now
    Asked by Lou F on June 27, 2019 1:13 pm
    Answered by the admin

    There is no manual to setup this case. We would be happy to answer any questions you have about setup, but generally recommend just copying the layout in the image. Otherwise if your gear is not the same you can use the cutouts for other purposes.

  2. Q Will this case fit the Phantom 4 RTK? answer now
    Asked by Brian Green on March 1, 2019 4:09 pm
    Answered by the admin

    The case will not work with the RTK module attached. If the RTK module is removed then it would fit.

  3. Q Will it fit a Phantom 3 pro? answer now
    Asked by Patrik G. on August 13, 2018 10:31 am
    Answered by the admin

    The Phantom 4 case does not fit the phantom 3 however our DJI Phantom 3 Case will fit the Phantom 3 Pro. Link: https://www.caseclub.com/product/dji-phantom-3-case/

Send me a notification for each new answer.