DJI Phantom 4 Compact Case

$ 129.95

Fits the DJI Phantom 4, Phantom 4 Pro, or Phantom 4 Pro +
Relief cutout in lid so added stress is not put on the drone.
Holds drone’s propellers along with extra propellers
Insert is equipped to hold 6 extra batteries along with a battery relief for the actual drone
Fits all major tablets (up to 12″x7″x1/2″) including the ipad air & ipad mini
Remote control cutout holds the DJI Phantom 4, Phantom 4 Pro, or Phantom 4 Pro+ remote
Small slots hold SD cards nicely, organized and well protected
A softer convolute foam pad below the drone is included which supports the gimbal and camera
Compact design leaves no wasted space. (Outside Case Dims. 20.75″ x 16.5″ x 9.25″)
4 heavy duty latches for an airtight seal
Foam is closed cell military grade polyethylene which can be wiped clean
Case also comes with keys to lock the latches
Case will float in water even if fully packed
Patent pending design manufactured by Case Club
Drone and accessories depicted in pictures are not included

Padlockable (with customer supplied padlock)

We accept Amazon Pay when purchasing DJI Phantom 4 Compact Case


The Compact Waterproof Drone Case for the DJI Phantom 4 by Case Club is designed to hold the DJI Phantom 4, Phantom 4 Pro, or Phantom 4 Pro Plus & accessories. The case features a watertight o-ring seal which will keep all moisture & debris out. The compact design will ensure easy transport, especially through airports and tight compartments. It is ideal for storing your drone with equipment safely while traveling, and highly recommended as a low-cost waterproof addition to the DJI factory box.

Additional Information

Interior Dimensions18.75"L x 14.00"W x 8.25"H
(476mm x 356mm x 209.55mm)
Exterior Dimensions20.75"L x 16.50"W x 9.25"H
(527mm x 419mm x 235mm)
Shipping Weight9.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(4.08 kg)
CharacteristicsWaterproof, Shippable, Crushproof, Outdoor Use
HardwarePadlockable, Hinged Lid, Built in Locks (option), Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodInjection Molded
Manufacturing OriginUnited States of America
Drone ModelDJI Phantom 4, DJI Phantom 4 Pro, DJI Phantom 4 Pro Plus
Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm -

Questions and answers of the customers

  1. Answered by the admin

    Unfortunately we don't have an off the shelf foam set for this case. In order to fill this case with foam you will have to order the raw material based on dimensions and then fit that into the case. The base of this case measures: 18.75"L x 14.00"W x 6.00"H. Simply enter those dimensions on the raw material page to order.

    Alternatively you can save money by ordering a non-pluckable foam sheet and cut it down smaller to fit this case. Those options can be found below that form.

  2. Q Is this case IP66? answer now
    Asked by Emilio Lillo on December 7, 2018 4:50 pm
    Answered by the admin

    Although this case has a full o-ring and purge valve it has not been officially IP66 tested. If an IP66 rating is required consider our slightly larger Phantom 4 Wheeled Case which is IP66 approved.

    (IP66 Enclosure - IP rated as "dust tight" and protected against heavy seas or powerful jets of water)

  3. Answered by the admin

    Yes, we ship internationally although the shipping cost tends to be rather expensive. Please email your shipping address and we will reply back with a quote.

Send me a notification for each new answer.