DJI Phantom 3 Case


Free ShippingFree Shipping*

Fits the Phantom 3 Professional, Advanced, Standard, and SE models
Cutouts in lid for propellers ensures props do not bend while case is closed (unlike competitor cases!).
2 (reusable) silica gel canisters included in the lid to remove moisture
Foam holds the phantom 3 with the propellers on or off (gimbal & camera attached)
Extra propellers can be stored in the the long pocket next to the drone
Insert is equipped to hold 6 extra batteries along with a battery relief for the actual drone
Propellers on the drone are held in place with precision cut plastic protruding from the foam
A cutout above the drone fits all major tablets (up to 12″x7″x1/2″) including the ipad air & ipad mini
Two large accessory pockets on the right and bottom have removable plastic dividers for versatility
Remote control cutout fits all Phantom 3 remotes
Small slots hold SD cards nicely, organized and well protected
A softer foam pad below the drone is included which supports the gimbal and camera
Case is airline approved for checked luggage
Shipping weight is 17 lbs unloaded
Wheels & extension handle built in for easy transport
Foam is closed cell military grade polyethylene which can be wiped clean
Case will float in water even if fully packed
Patent pending design manufactured by Case Club
Drone and accessories depicted in pictures are not included

Padlockable (with customer supplied padlock)

Case has a Lifetime Warranty

Categories: , , , SKU: ASSYCC920SEDJIPHANTOM3


The DJI Phantom 3 Wheeled Drone Case by Case Club is designed to hold the DJI Phantom 3 Drone along with various accessories. The case comes with a lifetime warranty and will vastly improve organization for your drone. The case features a watertight o-ring seal which will keep all moisture & debris out. A tote-handle and wheel system will ensure easy transport, especially through airports. It is ideal for storing your drone with equipment safely while traveling, and highly recommended for both professionals and hobbyists alike.

Product Specifications

Interior Dimensions22.24"L x 13.66"W x 8.49"H
(565mm x 347mm x 215.646mm)
Exterior Dimensions23.97"L x 16.00"W x 10.10"H
(609mm x 406mm x 257mm)
Shipping Weight17.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(7.71 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodInjection Molded
Manufacturing OriginUnited States of America
Drone ModelDJI Phantom 3

Customer Questions

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.