Case Club CC120833ISK Case

From: $62.40

Inside Dimensions: 12.00"L x 8.00"W x 3.25"H

Exterior Dimensions: 12.86"L x 9.70"W x 3.80"H

Lid / Base Split: 0.50"Lid / 2.75"Base

Shipping Weight: 2.60 lbs

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Built in Pressure Equalization Valve

Clear Selection

Description

Unconditional Lifetime Guarantee of Excellence

Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage. Features a molded-in hinge, patented “trigger release” latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810F).

Additional Information

Interior Dimensions12.00"L x 8.00"W x 3.25"H
(305mm x 203mm x 82.55mm)
Exterior Dimensions12.86"L x 9.70"W x 3.80"H
(327mm x 246mm x 97mm)
I.D. Lid/Base Split0.50"Lid / 2.75"Base
(13mm / 70mm)
Shipping Weight2.60 LBS (estimated weight of the product with packaging such as a cardboard box)
(1.18 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareNo Wheels, Padlockable, Hinged Lid, Built in Locks (option), Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodInjection Molded
Manufacturing OriginUnited States of America
Case Interior No Foam | With Customizable Foam | With PU Flat Foam | With PE Flat Foam | With Convoluted Foam | With Anti-Static Flat Foam
ID 100991: Case Club CC120833ISK Case
  • 100992: No Foam
  • 100994: With Customizable Foam
  • 100996: With PU Flat Foam
  • 100998: With PE Flat Foam
  • 101000: With Convoluted Foam
  • 101002: With Anti-Static Flat Foam

Questions and answers of the customers

  1. Answered by the admin Our shop decides the quantity and thickness of layers during production. However our policy is to always have a thin layer at the bottom which the gear can rest on. For this particular case you could expect a 3 layer insert. 1) Convolute foam for the lid. 2) ~2.75" layer in the base. 3) 0.5" layer below the 2.75" layer which the gear can sit on. The layer thickness could vary slightly from that however it should be a good guide on what you will receive. If you need to order in volume we can customize the foam to your exact requirements.

Send me a notification for each new answer.