Bullpup Rifle Case (Gen-2)

Name: Case Club
Price range: $$

$229.95

Free Shipping* / prime eligible

Fits Bullpup & Pistol

Padlockable (with customer supplied padlock)

Compatible Firearms

IWI Tavor 7, X95, SAR, TAR-21
Kriss Vector
Desert Tech SRS-A1 Covert
Desert Tech MDR, MDRX
Kel Tec RFB
Steyr AUG
FNH PS90, P90
Berretta CX4 Storm
*Above rifles must still fall within constraints of above "Max Dimension" diagram (Max length of rifle is 33.09")
Fits almost any semi-automatic pistol, with pistol magazines

Compatible Rifle Accessories

Accommodates all major scopes & optics within a 3.68" height
Holds up 4 standard or pmag (30-rd) magazines (and one PS90 Mag)
Allows for a forward (vertical) grip, laser or flashlight mounted under the barrel

Case Features

Case is 100% Waterproof, & Dustproof
Comes with a pressure release purge valve
Compact design leaves no wasted space
High-Impact resistant injection molded plastic
Hydro absorbent silica gel canister included to help prevent rust
Waterproof accessory box included for your small items
Foam insert is (closed cell) military grade polyethylene which can be wiped clean
Case is Airline Approved for checked luggage

Gen-2 Upgrades Include

Stainless steel added to padlock points for added security
2 edge wheels added so the case can roll
Orange peel texture added to exterior finish to minimize scratches
Structural ribs added to outside of case for increased durability
2 handles added (one on each end)
Front handle length increased to help counter balance off center weighted loads
Wide bodied snap latches that can be used with gloves

In stock

Bullpup Rifle Case (Gen-2) - Available at Amazon

Categories: Case Club Cases, Gun Cases, Rifle Cases SKU: ASSYCC108361PLBULLPUP

Description

The Case Club Bullpup Rifle Case features custom fabricated foam inserts precisely designed to securely hold and protect bullpup-style rifles and their components. The foam interior is carefully cut to fit the unique profile of bullpup rifles, ensuring that your firearm and accessories remain immobilized and shielded from impact during transport or storage.

Constructed with durable, crush-resistant materials, this case is also watertight and dustproof to provide reliable protection in various environments. The design includes built-in holes for padlocks, allowing for added security when needed.

Disclaimer: This case has been specifically designed for most standard-sized bullpup rifles. Firearms with oversized optics, extended controls, or other non-standard modifications may not fit properly. For the best fit and protection, use this case with rifles that fall within the constraints of the Max Dimension diagram shown, with a maximum rifle length of 33.09 inches.

Bullpup Rifle Case (Gen-2) - Features

Compatible Firearms

IWI Tavor 7, X95, SAR, TAR-21
Kriss Vector
Desert Tech SRS-A1 Covert
Desert Tech MDR, MDRX
Kel Tec RFB
Steyr AUG
FNH PS90, P90
Berretta CX4 Storm
*Above rifles must still fall within constraints of above "Max Dimension" diagram (Max length of rifle is 33.09")
Fits almost any semi-automatic pistol, with pistol magazines

Compatible Rifle Accessories

Accommodates all major scopes & optics within a 3.68" height
Holds up 4 standard or pmag (30-rd) magazines (and one PS90 Mag)
Allows for a forward (vertical) grip, laser or flashlight mounted under the barrel

Case Features

Case is 100% Waterproof, & Dustproof
Comes with a pressure release purge valve
Compact design leaves no wasted space
High-Impact resistant injection molded plastic
Hydro absorbent silica gel canister included to help prevent rust
Waterproof accessory box included for your small items
Foam insert is (closed cell) military grade polyethylene which can be wiped clean
Case is Airline Approved for checked luggage

Gen-2 Upgrades Include

Stainless steel added to padlock points for added security
2 edge wheels added so the case can roll
Orange peel texture added to exterior finish to minimize scratches
Structural ribs added to outside of case for increased durability
2 handles added (one on each end)
Front handle length increased to help counter balance off center weighted loads
Wide bodied snap latches that can be used with gloves

Product Specifications

Interior Dimensions	37.00"L x 13.00"W x 5.12"H (940mm x 330mm x 130.048mm)
Exterior Dimensions	40.00"L x 16.00"W x 5.50"H (1,016mm x 406mm x 140mm)
Shipping Weight	21.00 LBS (estimated weight of the product with packaging such as a cardboard box) (9.53 kg)
Characteristics	Waterproof, Shippable, Crushproof, Outdoor Use
Hardware	Wheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Rifle / Shotgun Type	Desert Tech MDR, MDRX, Desert Tech SRS A1 Covert, FNH PS90, P90, IWI Tavor 7, X95, SAR, TAR-21, Kel Tec RFB, Kriss Vector, Ruger CX4 Storm, Steyr AUG
Pistol Type	Fits Semi-Autos
Case Material	Plastic
Manufacturing Method	Precision Cut, Injection Molded
Manufacturing Origin	United States of America
Extended Title	Fits Bullpup & Pistol
SKU	ASSYCC108361PLBULLPUP

Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Read more...

California Proposition 65

You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.

For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.

We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us.

Bullpup Rifle Case (Gen-2)'s Pre-cut Template

Bullpup Rifle Case (Gen-2) - Videos

Bullpup Rifle Case

Case Club Hydro Absorbent Silica Gel Video - Overview

Customer Questions

Q I also have the same question regarding a premade Bullpup Rifle Case fitting a Springfield Hellio... answer now
Asked by Chas Terry on January 4, 2023 8:35 am

Answered by the admin
Rifles, such as the Springfield Hellion, that are not listed as compatible have not been tested within this case. This means that although it is possible the rifle may fit, we generally advise against that assumption*. If you do place an order, we would indeed be interested in any images you could provide of the Hellion fitting (or not fitting) into the case.

*If you happen to be local in southern California please call in and we may be able to accommodate your rifle.

A The premade Bullpup case does NOT fit the Springfield Hellion from the factory. I made a couple of simple modifications and now am happy with the fit. I would have provided some pictures but do not see an option for attachments listed. Expected fitting with this case Fitting results after hand cutting the foam
Q Big fan of your cases- got a shotgun case for my ksg and sd9 and have been in love with the case ... answer now
Asked by Colin M on March 26, 2022 2:19 pm

Answered by the admin Although our Bullpup Rifle Case will be the most likely of our Premade Rifle Cases to fit your Springfield Hellion, the case has not yet been tested with that rifle, so we cannot say it would fit. If you do decide to purchase the Bullpup Rifle Case, it would be appreciated if you reached out to us again after receipt of the item, as we would be keen to know if the Springfield Hellion indeed fits this case. If purchased from Amazon, you will even be able to return the case within 30 days for a full refund.
Q Will this case also work for a Tavor 7? answer now
Asked by Jason on June 21, 2020 6:24 pm

Answered by the admin
Yes, this will work with the Tavor 7.
Q Are the cutouts available for the FN P90 without disassembling? answer now
Asked by Frank on April 15, 2020 12:35 am

Answered by the admin
The FN P90 or PS90 will fit, but there will be wasted space.
Q I have a Steyr Aug with a 20" barrel and the integrated 3X scope which is not removable. Will th... answer now
Asked by Don on September 11, 2019 7:50 pm

Answered by the admin
The Steyr AUG with a 20" barrel and the integrated 3x scope will indeed fit into this case.
Q I have a Kriss Vector SBR. Your case seems ideal. I did not see any place to choose the rifle typ... answer now
Asked by Curtiss on April 14, 2019 6:59 am

Answered by the admin
No rifle selection is necessary. This product will be delivered, ready to go for your Kriss Vector. By removing the existing cutouts your Kriss Vector SBR will immediately fit. You can further customize the fit by trimming the foam pieces to a more exact shape based on your setup/gear. I have highlighted below the outline of a Kriss Vector SBR overlaid on the existing cutouts. It should give you an accurate idea on what foam trimming is needed. It depends on what gear you have, but from the look of it, I would expect a little trimming in the stock area & in the barrel area (to shorten the cutout length to the SBR)
Q I recently purchased a Sig Sauer MPX Copperhead ultra compact rifle. The rifle specifications are... answer now
Asked by Bob Holdyk on February 13, 2019 2:50 pm

Answered by the admin
Although still not built for a Sig Sauer MPX, Our MP5 Case would be a closer starting fit to your MPX Rifle, complete with slots that hold 4 magazines (similar in shape to MPX magazines). Some minor modifications still might need to be cut for the perfect fit. For a completely custom foam option, we would need either a tracing of the rifle and parts, or (if you are local to us in Anaheim, Ca) the items themselves. The custom route has increased costs (~$325) and lead times (~2 weeks) compared to our pre-made options, but please feel free to call 877-412-2737 any time M-F 8:00 am -4:30 pm PST to talk to a sales associate for up-to-date pricing.
Q I have a rifle that is not listed as one of the compatible rifles, would it still fit? Could I ha... answer now
Asked by Christopher Rutledge on November 23, 2018 11:21 pm

Answered by the admin Rifles that are not listed as compatible have not been tested within this case, so although it is possible they may fit, we generally advise against that assumption. Custom foam inserts are a great option for this situation. We just need either the rifle itself or a tracing of the rifle.