AR Pistol (or SBR) & AR15 Rifle Case

$199.95

Free ShippingFree Shipping* / prime eligible

Fits AR15 & SBR/Pistol

Make sure to load the “Lid Gun” in last when loading the case, and unload it first when unloading the case. This will prevent the case from tipping over.

Padlockable (with customer supplied padlock)

Case Fits:

  • AR15 Rifle with Collapsible Stock: Qty 1
  • AR Pistol or Short Barrel Rifle: Qty 1
  • Semi-Automatic Handgun (subcompact to full-size): Qty 1
  • AR standard or pmag (30 rnd) Magazines: Qty 4
  • Pistol Magazines: Qty 2
  • Small Accessories: Qty 2 Pockets

Case Also Accommodates:

  • Attached Rifle Optics
  • Underbarrel Attachments such as foregrips or flaslights
  • Buffer Tubes, Braces, or Collapsible Stocks on the lower rifle
  • Pistol Optics or Underbarrel Attachments
  • Silica Gel (Included)

Case Does NOT fit:

  • Side attachments
  • Bipods
  • Palm Shelves
  • Firearms that exceed the dimensions on the "Maximum Dimension Diagram"

Case Features

  • Case is waterproof, dustproof, and airtight
  • Comes with wheels for easy transport
  • Comes with a pressure release purge valve
  • Hydro absorbent silica gel canister included to help prevent rust
  • Comes with divider piece of foam to separate guns from each other
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage
  • Stainless steel added to padlock points for added security
  • Orange peel texture added to exterior finish to minimize scratches
  • Structural ribs added to outside of case for increased durability
  • Wide bodied snap latches that can be used with gloves
  • 3rd Handle added for 2 person carry

In stock

Description

Maximum Allowable Dimensions:

The Case Club AR15 & SBR | Pistol Case is 2nd to none in terms of quality, convenience, and affordability. In short, it is the best option on the market today. The precut foam will fit up to one AR15 and one AR15 SBR or AR Pistol with up to a 14″ barrel, as well as most optics and attachments. The base also holds a full size pistol and extra rifle & pistol magazine. Velcro straps ensure the lid rifle does not move around while the case is in transit. The case comes with a silica gel canister to help keep contents dry. Once the silica gel is saturated just pop it in the oven to cook out the moisture & use it again. The case itself is weatherproof, wheeled, dustproof, & has a built in pressure equalization valve for changing altitudes. It is heavy duty enough to ship or check on an airplane and can handle the abuse from TSA agents. Four built in heavy duty latches ensure nothing gets in or out. Padlockable holes are built right into the case, and can take standard sized padlocks so you can be guaranteed this case is safe & secure. The foam insert is closed cell military grade polyethylene which can be wiped clean if wet or oily. The foam is perforated above and below all of the firearm cutouts so you can remove the foam (with included knife) as needed to customize the insert for your unique optics and attachments. This case is compact, organized, uses all available space to the fullest, and won’t break the bank. Make sure to take the lid rifle out first and put it in last during operation, so that the case does not tip over. Protect your investment, buy Case Club.

AR15 & SBR Case - Features

Case Fits:

AR15 Rifle with Collapsible StockQty 1
AR Pistol or Short Barrel RifleQty 1
Semi-Automatic Handgun (subcompact to full-size)Qty 1
AR standard or pmag (30 rnd) MagazinesQty 4
Pistol MagazinesQty 2
Small AccessoriesQty 2 Pockets

Case Also Accommodates:

  • Attached Rifle Optics
  • Underbarrel Attachments such as foregrips or flaslights
  • Buffer Tubes, Braces, or Collapsible Stocks on the lower rifle
  • Pistol Optics or Underbarrel Attachments
  • Silica Gel (Included)

Case Does NOT fit:

  • Side attachments
  • Bipods
  • Palm Shelves
  • Firearms that exceed the dimensions on the "Maximum Dimension Diagram"

Case Features

  • Case is waterproof, dustproof, and airtight
  • Comes with wheels for easy transport
  • Comes with a pressure release purge valve
  • Hydro absorbent silica gel canister included to help prevent rust
  • Comes with divider piece of foam to separate guns from each other
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage
  • Stainless steel added to padlock points for added security
  • Orange peel texture added to exterior finish to minimize scratches
  • Structural ribs added to outside of case for increased durability
  • Wide bodied snap latches that can be used with gloves
  • 3rd Handle added for 2 person carry

Product Specifications

Exterior Dimensions40.00"L x 16.00"W x 5.50"H
(1,016mm x 406mm x 140mm)
Shipping Weight23.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(10.43 kg)
CharacteristicsWaterproof, Shippable, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Rifle / Shotgun TypeAR Pistol, AR15 (Short Barrel), AR15 Rifle
Pistol TypeFits Semi-Autos
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
Extended TitleFits AR15 & SBR/Pistol
Quantity of Long Guns2
BrandAR Pistol
SKU CC6108HXYWSBRAR

AR Pistol (or SBR) & AR15 Rifle Case's Pre-cut Template

AR Pistol (or SBR) & AR15 Rifle Case - Videos

AR Pistol (or SBR) & AR15 Rifle Case

AR Pistol (or SBR) & AR15 Rifle Case - Video

Case Club Hydro Absorbent Silica Gel Video - Overview

Case Club Hydro Absorbent Silica Gel Video - Overview - Video

Customer Questions

  1. Answered by the admin This case can indeed hold 2 AR15's, as long as one of them is an SBR. Please refer to the "maximum dimension image", which gives the maximum allowable dimensions for the Top Gun & the Bottom Gun.
  2. Answered by the admin

    There is no (easy) way to swap the lid & base foam. You are correct regarding the different foam thicknesses. Furthermore, the whole foam insert was designed around the protruding wheel wells inside. Therefore swapping the two won't be realistically possible without completely re-engineering the product.

Send me a notification for each new answer.