22-36 Graded Comic Book Slab Collector Case

$169.95

Free ShippingFree Shipping* / prime eligible

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Case Fits

  • 22 Comic Book Slabs Separated, or
  • up to 36 Comic Book Slabs Touching (after cutting out the separator tabs), or
  • up to 224 Loose Comic Books (not in slabs), or
  • A combination of any configuration above

Foam Design Options

  • Remove all the foam plugs for standard (separated) slab storage (qty 22)
  • Cut the finger separators off for increased slab capacity if you don't mind the slabs touching each other (qty 36)
  • Insert the foam spacers (on the sidewall and bottom) to instead securely hold loose comic books (qty 224)
  • Cut the foam spacers smaller and insert select bottom spacers to hold both slabs & loose comic books at the same time
  • Complete customization based on your unique setup

Case Features

  • Case is 100% shippable and airline approved for TSA checked luggage
  • Two padlock points that support a customer supplied padlock with a 1/4" shackle
  • 100% Waterproof (IP67) & Dustproof
  • Wide bodied snap latches can be used with thick gloves
  • All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
  • Fully ATA and TSA approved and compliant in all 50 states
  • Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil

Please Note

  • The case will weigh 35 lbs fully loaded, with the slabs separated
  • The case will weigh 52+ lbs fully loaded, with the slab separators cut out and the slabs touching
  • The case does NOT have wheels, so it is most ideal for shipping to tradeshows, long term storage, or short distance walking transport
  • Slab slot dimensions: 13.25" x 0.65" x 8"
  • *Comic books & slabs depicted are not included

In stock

Description

Introducing the ultimate storage solution for your comic book collection: the Comic Book Case. With the ability to hold up to 22 comic book slabs separated, or up to 36 comic book slabs touching (after cutting out the separator tabs), or up to 224 loose comic books (not in slabs), or a combination of any configuration, this case has the versatility to meet your unique storage needs.

The foam design options are equally customizable. You can remove all the foam plugs for standard (separated) slab storage, cut the finger separators off for increased slab capacity if you don’t mind the slabs touching each other, insert the foam spacers (on the sidewall and bottom) to securely hold loose comic books, or cut the foam spacers smaller and insert select bottom spacers to hold both slabs and loose comic books at the same time.

In addition to its impressive storage capacity, the Comic Book Case is also 100% shippable and airline approved for TSA checked luggage, has two padlock points that support a customer supplied padlock with a 1/4″ shackle, and is 100% waterproof (IP67) and dustproof. The wide bodied snap latches can be used with thick gloves, and all latch and hinge pins are made of stainless steel. The injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points, making it fully ATA and TSA approved and compliant in all 50 states. The base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene, which won’t absorb moisture or oil.

Please note that the case will weigh 35 lbs fully loaded with the slabs separated, and will weigh 52+ lbs fully loaded with the slab separators cut out and the slabs touching. The case does not have wheels, so it is most ideal for shipping to tradeshows, long term storage, or short distance walking transport. The slab slot dimensions are 13.25″ x 0.65″ x 8″. Please note that the comic books and slabs depicted are not included. The Comic Book Case comes with a lifetime warranty.

22-36 Graded Comic Book Slab Collector Case - Features

Case Fits

  • 22 Comic Book Slabs Separated, or
  • up to 36 Comic Book Slabs Touching (after cutting out the separator tabs), or
  • up to 224 Loose Comic Books (not in slabs), or
  • A combination of any configuration above

Foam Design Options

  • Remove all the foam plugs for standard (separated) slab storage (qty 22)
  • Cut the finger separators off for increased slab capacity if you don't mind the slabs touching each other (qty 36)
  • Insert the foam spacers (on the sidewall and bottom) to instead securely hold loose comic books (qty 224)
  • Cut the foam spacers smaller and insert select bottom spacers to hold both slabs & loose comic books at the same time
  • Complete customization based on your unique setup

Case Features

  • Case is 100% shippable and airline approved for TSA checked luggage
  • Two padlock points that support a customer supplied padlock with a 1/4" shackle
  • 100% Waterproof (IP67) & Dustproof
  • Wide bodied snap latches can be used with thick gloves
  • All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
  • Fully ATA and TSA approved and compliant in all 50 states
  • Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil

Please Note

  • The case will weigh 35 lbs fully loaded, with the slabs separated
  • The case will weigh 52+ lbs fully loaded, with the slab separators cut out and the slabs touching
  • The case does NOT have wheels, so it is most ideal for shipping to tradeshows, long term storage, or short distance walking transport
  • Slab slot dimensions: 13.25" x 0.65" x 8"
  • *Comic books & slabs depicted are not included

Product Specifications

Interior Dimensions21.62"L x 13.81"W x 11.31"H
(549mm x 351mm x 287.274mm)
Exterior Dimensions24.00"L x 17.00"W x 12.00"H
(610mm x 432mm x 305mm)
Shipping Weight14.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(6.35 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareNo Wheels, Padlockable, Hinged Lid
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
SKU CC5026HXYWCOMICS

22-36 Graded Comic Book Slab Collector Case - Videos

22-36 Graded Comic Book Slab Collector Case

22-36 Graded Comic Book Slab Collector Case - Video

Customer Questions

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.