Universal 3 Rifle & Accessory Case

$664.67

Holds MultipleRifles (Up to 3)
Max length of rifle is 33.45″
Max width of buttstock is 1.75″
Fits both standard carbines & mid length rifles that have a 16″ barrel with collapsible stock
Allows for a forward (vertical) grip, laser or flashlight mounted directly under the rail (within 1.5″ in diameter & within 5″ tall)
Accommodates all major scopes & optics within a 3″ height
Not compatible with side attachments, bipods, palm shelves
Compact design leaves no wasted space
Case is comprised of high strength copolymer polypropylene
Two hydro absorbent silica gel canisters included to help prevent rust
Foam insert is (closed cell) military grade polyethylene which can be wiped clean
Estimated 1 week lead time

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Accepted credit cards Amazon Pay available

Description

The Universal 3 Rifle & Accessory Case by Case Club holds up to 3 Rifles with plenty of extra room for accessories. It comfortably holds three rifles that fit within the allotted specs (diagram below), along with all the extra shooting gear you may ever need. It was designed by professionals for enthusiasts, competitors, and agencies alike. This waterproof case can accommodate all major optics including ACOG, AIM Point, etc, as well as common rifle add-ons. The case also accommodates lights, underbarrel attachments, pistol grips, vertical & angled foregrips, front sights, over-under barrels, and much more. All the foam is military grade polyethylene which is oil proof so if it gets dirty it can simply be wiped clean. The case itself is waterproof, dustproof, shippable & has a lifetime warranty. A purge valve keeps the moisture out while allowing the case to be opened in high or low altitude, and each case includes two silica gel canisters to soak up moisture and help keep everything rust free. Purchase more than one and you can stack them up!

Additional Information

Interior Dimensions34.50"L x 24.50"W x 12.50"H
(876mm x 622mm x 317.5mm)
Exterior Dimensions37.00"L x 27.00"W x 14.00"H
(940mm x 686mm x 356mm)
Shipping Weight43.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(19.50 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodInjection Molded
Manufacturing OriginUnited States of America
Quantity of Long Guns3
Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

California Proposition 65

You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.

For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.

We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us.

Questions and answers of the customers

  1. Answered by the admin

    The accessory pocket measures 33.26" x 11.85" x 9.00". The foam insert cannot be modified by us from what is shown however the case will come with the foam plugs in place if you wanted to use those pieces to further customize on your end.

  2. Answered by the admin You could certainty cutout a bipod relief. The foam is easily modifiable with a knife or blade. Although if more than 1 gun had a bipod, they may hit each other after making those relief cuts.
  3. Answered by the admin

    Although the bullpup rifles would likely fit it would be a major waste of space for this large sized case while a standard AK47 would exceed the max length of 33.34" & would not work.

Send me a notification for each new answer.