Pelican™ 1650 Case

From: $244.95

Inside Dimensions: 29.00"L x 17.88"W x 10.50"H

Exterior Dimensions: 32.50"L x 20.50"W x 11.31"H

Lid / Base Split: 2.00"Lid / 8.50"Base

Shipping Weight: 37.00 lbs

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Built in Pressure Equalization Valve

Clear Selection


The Pelican™ Unconditional Lifetime Guarantee of Excellence

The Pelican™ 1650 case is built to take abuse for the larger items you may need to ship or store. With 7 large latches, tilt wheels and an extension handle the Pelican™ 1650 case is the ultimate protection for items you want to transport. Everything from the added support of the exterior ribs to the hefty corners says the 1650 case was made to be shipped. The Pelican™ 1650 case is one of Pelican™ Products original cases and is still going strong with only a few minor improvements throughout the years.

Pelican™ 1650 Case is waterproof, dustproof and crushproof.

The Pelican™ 1650 case is exceptionally durable, watertight, dustproof, chemical resistant and corrosion proof. The Pelican™ 1650 case is one of the toughest shipping cases made and offers supreme protection with its Ultra High Impact structural copolymer construction. The 1650 case’s exclusive 1/4″ (6.4 mm) neoprene o-ring and ABS latches seal absolutely and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. The Pelican™ 1650 case has 2″ (5 cm) polyurethane wheels, a retractable extension handle and multiple fold down carrying handles for your carrying convenience. The 1650 case comes empty or with either high density foam or padded dividers which provide total protection against impact, vibration and shock. The Pelican™ 1650 case is tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). If you need a larger case be sure to check out the Pelican™ 1660 Case.

Additional Information

Interior Dimensions29.00"L x 17.88"W x 10.50"H
(737mm x 454mm x 266.7mm)
Exterior Dimensions32.50"L x 20.50"W x 11.31"H
(826mm x 521mm x 287mm)
I.D. Lid/Base Split2.00"Lid / 8.50"Base
(51mm / 216mm)
Shipping Weight37.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(16.78 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Case Interior No Foam | With Customizable Foam | With Padded Dividers | With PU Flat Foam | With PE Flat Foam | With Convoluted Foam | With Anti-Static Flat Foam | With PU Foam Lining | With PE Foam Lining | With Anti-Static Foam Lining
Case MaterialPlastic
Manufacturing OriginUnited States of America
Manufacturing MethodInjection Molded
Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm -

California Proposition 65

You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.

For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.

We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us.

Questions and answers of the customers

  1. Answered by the admin

    Assuming you are looking to cutout the foam yourself (as opposed to having us laser cut it), there are two options.

    1. The least expensive option is to purchase anti-static foam sheets from our website to cut & fit into the case yourself. These sheets are raw material and would require you to cut the case perimeter so it could fit in the case. You would have to yield the material to figure out how much foam is needed to fill this case.
    2. We can cut the foam in house to fit the Pelican 1650 so you don't have to. It is more expensive to have us cut the perimeter, but when you receive the foam it will perfectly fit into your case and will be ready to go for your customization. For this option you would need to call, but as a ballpark price you would be looking at about $162 for one foam set. (Price goes down for more sets).

    Alternatively, we also have custom foam capabilities if you were interested in a complete turnkey product. Call us for this option as well 877.412.2737.

Send me a notification for each new answer.