Pelican™ 0340 Case

From: $263.63

Inside Dimensions: 18.00"L x 18.00"W x 17.50"H

Exterior Dimensions: 20.39"L x 20.42"W x 19.25"H

Lid / Base Split: 4.25"Lid / 13.25"Base

Shipping Weight: 30.00 lbs

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Built in Pressure Equalization Valve

Clear Selection


The Pelican™ Unconditional Lifetime Guarantee of Excellence

The Pelican™ 0340 case was the first and is currently the smallest cube case made by Pelican™ Products. The Pelican™ 0340 case has two large fold down handles on either side so that two people can easily carry it around. Also included with the Pelican™ 0340 case are a a set of caster wheels that attach to the bottom. If you choose to use them, a handle on top of the 0340 case folds out so the case can be wheeled around by one person. The Pelican™ 0340 case is made to make your life easier.

Pelican™ 0340 Case is waterproof, dustproof and crushproof.

The Pelican™ 0340 case had 6 double throw latches (2 on each side) to give it a tight seal. So tight in fact the Pelican™ 0340 case is fully watertight to the point where it can be submerged without water penetration. The automatic purge valve on the front of the 0340 case allows air to move freely in and out. This makes opening the Pelican™ 0340 case easy in higher altitudes. Another feature you may notice on the Pelican™ 0340 case are the large ribs on the front. These ribs protect the latches from hard hits when in transit and also provide structural support to the Pelican™ 0340 case itself.

Additional Information

Interior Dimensions18.00"L x 18.00"W x 17.50"H
(457mm x 457mm x 444.5mm)
Exterior Dimensions20.39"L x 20.42"W x 19.25"H
(518mm x 519mm x 489mm)
I.D. Lid/Base Split4.25"Lid / 13.25"Base
(108mm / 337mm)
Shipping Weight30.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(13.61 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Casters (set of 4)), Padlockable, Hinged Lid, Pressure Equalization Valve
Case Interior No Foam | With Customizable Foam | With Padded Dividers | With PU Flat Foam | With PE Flat Foam | With Convoluted Foam | With Anti-Static Flat Foam | With PU Foam Lining | With PE Foam Lining | With Anti-Static Foam Lining
Case MaterialPlastic
Manufacturing OriginUnited States of America
Manufacturing MethodInjection Molded
Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm -

California Proposition 65

You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.

For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.

We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.