Case Club CC4414103ISK Case

From: $221.41

Inside Dimensions: 44.50"L x 14.50"W x 10.00"H

Exterior Dimensions: 47.00"L x 17.00"W x 10.84"H

Lid / Base Split: 2.00"Lid / 8.00"Base

Shipping Weight: 30.00 lbs

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Built in Pressure Equalization Valve


Unconditional Lifetime Guarantee of Excellence

Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage. Features a molded-in hinge, patented “trigger release” latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810F).

Product Specifications

Interior Dimensions44.50"L x 14.50"W x 10.00"H
(1,130mm x 368mm x 254mm)
Exterior Dimensions47.00"L x 17.00"W x 10.84"H
(1,194mm x 432mm x 275mm)
I.D. Lid/Base Split2.00"Lid / 8.00"Base
(51mm / 203mm)
Shipping Weight30.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(13.61 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Built in Locks (option), Pressure Equalization Valve
Case Interior No Foam | With Customizable Foam | With PU Flat Foam | With PE Flat Foam | With Convoluted Foam | With Anti-Static Flat Foam | With PU Foam Lining | With PE Foam Lining | With Anti-Static Foam Lining

Customer Questions

  1. Answered by the admin

    The foam in this case is determined by our production department once an order is placed so it can vary from order to order. However you have the option of specifying a specific layer thickness if desired. On the checkout page, there is a comment section in which you can specify your desired foam thicknesses. From there once the order is placed our production will accommodate your request provided the foam layers correctly add up to the interior case height. Be advised the lead-time will be about 2 weeks for this service. 

  2. Answered by the admin

    Since we would be custom cutting the foam just for you, you can specific whatever details you want. Go ahead and proceed with the checkout process and during that process, there is a comment section. In that section specify all the foam details you want and our production dept. will cut the foam following your instructions. You may choose to have flat foam in the lid or egg crate and you may also specific the layer thickness. Just make sure it is clear what layer is the top and what layer is the bottom, because the bottom layer will have wheel cutouts in it. As a reminder this will not be returnable since it is custom made so be sure to measure twice before ordering!

  3. Answered by the admin

    The PU flat foam option (along with all other foam options) will come in sheets of foam. (NOT one block). The sheet thickness is determined by our shop and may vary per order. Generally it will be around 2" thick sheets for this size case; however if you'd prefer, you can specify the exact sheet thickness you want in the comment section on the checkout page.

Send me a notification for each new answer.