2 Pistol & Accessory Case (Gen-2)

Name: Case Club
Price range: $$

$103.44

Free Shipping* / prime eligible

Semi-Autos Only

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Case Features

Comes with a magazine module that can be taken out to create a larger accessory pocket or left in place for magazine storage
Case is high-strength polypropylene
Hydro absorbent silica gel canister included to help prevent rust
Foam insert is (closed cell) military grade polyethylene which can be wiped clean
Case is Airline Approved for checked luggage
Fits under-barrel attachments and small red dots
Quick draw design is compact and leaves no wasted space
Max length of pistols is 8 5/8"
Not intended for revolvers

Case will hold up to 2 pistols &...

6 magazines with the magazine modules removed, or...
18 magazines with magazine module in place

Gen-2 upgrades include

Magazine module that can be taken out for accessory storage or left in place for magazine storage
Length & height adjustment blocks built into the foam to for properly fitting compact and sub-compact guns
Wide bodied snap latches that can be used with gloves
Front handle length increased to help counter balance off center weighted loads
Orange peel texture added to exterior finish to minimize scratches
All latch pins, hinge pins, & handle pins upgraded from plastic to steel
Exterior structural ribs added for durability

In stock

2 Pistol & Accessory Case (Gen-2) - Available at Amazon

Categories: 2 Pistol Cases, Case Club Cases, Gun Cases, Pistol Cases SKU: ASSYCC540SEPIS2A

Description

The 2 Pistol Accessory Case offers secure storage for up to two semi-automatic pistols and multiple magazines, with additional compartments for accessories like tools, cleaning kits, or ear protection. It features a durable hard-shell exterior with custom-cut foam inserts that ensure a snug, protective fit tailored to each item. This case supports most under-barrel attachments but does not accommodate red dot sights. Not designed for revolvers. Max pistol length is 8 5/8″.

Disclaimer: This case has been specifically designed and tested for most standard-sized semi-automatic pistols. Firearms with oversized optics, extended controls, or other non-standard modifications may not fit properly. For the best fit and protection, use this case with pistols that fall within the listed dimensional guidelines.

2 Pistol & Accessory Case (Scratched) - Features

Case Features

Comes with a magazine module that can be taken out to create a larger accessory pocket or left in place for magazine storage
Case is high-strength polypropylene
Hydro absorbent silica gel canister included to help prevent rust
Foam insert is (closed cell) military grade polyethylene which can be wiped clean
Case is Airline Approved for checked luggage
Fits under-barrel attachments and small red dots
Quick draw design is compact and leaves no wasted space
Max length of pistols is 8 5/8"
Not intended for revolvers

Case will hold up to 2 pistols &...

6 magazines with the magazine modules removed, or...
18 magazines with magazine module in place

Gen-2 upgrades include

Magazine module that can be taken out for accessory storage or left in place for magazine storage
Length & height adjustment blocks built into the foam to for properly fitting compact and sub-compact guns
Wide bodied snap latches that can be used with gloves
Front handle length increased to help counter balance off center weighted loads
Orange peel texture added to exterior finish to minimize scratches
All latch pins, hinge pins, & handle pins upgraded from plastic to steel
Exterior structural ribs added for durability

Product Specifications

Interior Dimensions	14.60"L x 10.50"W x 6.00"H (371mm x 267mm x 152.4mm)
Exterior Dimensions	16.75"L x 12.62"W x 6.75"H (425mm x 321mm x 171mm)
Shipping Weight	9.00 LBS (estimated weight of the product with packaging such as a cardboard box) (4.08 kg)
Characteristics	Waterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
Hardware	No Wheels, Padlockable, Hinged Lid, Pressure Equalization Valve
Case Material	Plastic
Manufacturing Method	Injection Molded
Manufacturing Origin	United States of America
Quantity of Pistols	2
Pistol Type	Fits Semi-Autos
Extended Title	Semi-Autos Only
SKU	ASSYCC540SEPIS2A

Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Read more...

California Proposition 65

You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.

For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.

We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us.

2 Pistol & Accessory Case (Gen-2) - Videos

2 Pistol & Accessory Case

Case Club Hydro Absorbent Silica Gel Video - Overview

Customer Questions

Q What are the dimensions of the accessory area LxHxW with the extra magazine slots intact? Can I ... answer now
Asked by Jeff on August 17, 2024 9:47 am

Answered by the admin
The extra storage pocket, with the magazine module still installed/intact, measures 6.61x5.72x4.0 inches. The magazine module cannot easily be cut in half. If a user does successfully manage to cut off a row of 6, the extra space would instead measure about 6.61x7.54x4.0 inches.
Q Is this case TSA approved? answer now
Asked by Alan Michels on January 7, 2023 12:58 pm

Answered by the admin
Yes. This case is 100% TSA approved for checked luggage.
Q Is the bottom foam removable in its entirety? answer now
Asked by shane on November 4, 2022 9:18 am

Answered by the admin
No. The foam is glued into the case.
Q Will the case accommodate a Glock 34 (8.82-inch length)? With red dot optic? answer now
Asked by Shane on November 2, 2022 4:35 pm

Answered by the admin
Yes, the Glock 34 will fit in this case with a red dot if there is no under barrel attachment.
Q Can I fit a gun with an optic in this case? answer now
Asked by ivan on October 24, 2020 3:41 am

Answered by the admin Yes. Small red dots will fit.
Q What is the largest size lock shaft, in inches or MM, that this case will accommodate? answer now
Asked by Gery on August 14, 2020 8:43 am

Answered by the admin
The case will fit a 0.3" shackle diameter however if you keep it to 0.25" it won't be too tight and will be easier to take on and off.
Q Will the case close without any issues with guns that slide straight down with a light attachment... answer now
Asked by Daniel on April 13, 2020 11:07 pm

Answered by the admin
A light attachment and optic (together) may be too tight to shut the case. The guns would have to sit in the horizontal position so the light can properly drop downwards. Even if you could close the case, you would want to be wary because the optic will stick straight up, pushing against the lid foam.
Q What is the max diameter for padlock? answer now
Asked by Craig on June 18, 2019 6:47 pm

Answered by the admin
The padlock hole diameter is 0.3".
Q How many foam pieces should be pulled from storage side? I pulled one not sure if second can be p... answer now
Asked by chapman on February 6, 2019 9:53 am

Answered by the admin
The storage side goes 2 layers deep. If you want shallow storage only pull one layer of foam. If you want a deeper storage area go ahead and pull out the second layer.