Pelican™ 1720 Case

From: $228.73

Inside Dimensions: 42.00"L x 13.56"W x 5.31"H

Exterior Dimensions: 44.38"L x 16.00"W x 6.13"H

Lid / Base Split: 1.68"Lid / 3.63"Base

Shipping Weight: 22.00 lbs

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Built in Pressure Equalization Valve

Clear Selection
Accepted credit cards Amazon Pay available

Description

The Pelican™ Unconditional Lifetime Guarantee of Excellence

The Pelican™ 1720 rifle case is a rifle case made by Pelican™ Products to fit medium size rifles (less than 42″). The Pelican™ 1720 case is perfect for larger black rifles, or those firearms used in close to medium distance combat (picture features the military issued M-16). Extra room around your rifle will allow space for magazines, scopes / optics, lasers, and a Pelican™ Flashlight (we recommend the #2320 M6 Lithium to mount on your gun). The Pelican™ 1720 case is a great waterproof case that can be thrown quickly into a combat vehicle, or squad car taking up minimal space while protecting your rifle. For a smaller case view the Pelican™ 1720 Case, and for a larger one, view the Pelican™ 1750 Case.

Pelican™ 1720 Case is waterproof, dustproof and crushproof.

The Pelican™ 1720 case is perfect for the average size rifle. The 1720 case features include tilt wheels with a fold down handle on one side. Unlike the Pelican™ 1720 Case the handle on the front of the Pelican™ 1720 case folds down and out of the way. An automatic purge valve on the 1720 case allows air to move in freely while still keeping out moisture. This means opening the Pelican™ 1720 case in high altitudes a breeze. An o-ring seal keeps the 1720 case waterproof to the point where it can be fully submerged. The double throw latches open in a way that pry against itself creating an easy to open Pelican™ 1720 case. If you need a larger case be sure to check out the Pelican™ 1750 Case.

Additional Information

Interior Dimensions42.00"L x 13.56"W x 5.31"H
(1,067mm x 344mm x 134.874mm)
Exterior Dimensions44.38"L x 16.00"W x 6.13"H
(1,127mm x 406mm x 156mm)
I.D. Lid/Base Split1.68"Lid / 3.63"Base
(43mm / 92mm)
Shipping Weight22.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(9.98 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Case Interior No Foam | With Customizable Foam | With PU Flat Foam | With PE Flat Foam | With Convoluted Foam | With Anti-Static Flat Foam | With PU Foam Lining | With PE Foam Lining | With Anti-Static Foam Lining
Case MaterialPlastic
Manufacturing OriginUnited States of America
Manufacturing MethodInjection Molded
Legal Disclaimer

CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

California Proposition 65

You may have heard that everything gives you cancer – if you live in California. The reason is that it is a California state law that requires businesses to provide reasonable warning about the use of any chemicals the state has decided could cause cancer, birth defects, or other reproductive harm. The list of chemicals and substances is extensive - currently totaling approximately 900.

For those consumers who live outside of California, you are not accustomed to seeing Prop 65 Warnings everywhere you go to shop, eat, buy groceries, fix your car, and are even posted at amusement parks.

We have no reported cases of our products causing harm or danger to anyone. We believe in the safety of our products and we meet all the applicable safety requirements. We are unable to test against the 900+ chemicals listed for Prop 65 and to 100% certainty, and therefore, in an abundance of caution, we have placed the warning on our products to be in compliance with this California regulation. You will also see the Prop 65 warning on products that you buy outside of California, because we are unable to determine our products’ final retail destination.
For any questions you may have about our products and California Prop 65, please contact us.

Questions and answers of the customers

  1. Answered by the admin When we supply cases with PE flat foam, the customer has the ability to specify what layer thicknesses they would prefer. If no layer thickness is specified, then our production will decide. For this case with a 3.63" base, we will generally supply it with 2 layers of 1.5" & 1 layer of 1/2". Since we are cutting the foam in house, we will ensure a proper fit in all dimensions so there will be no "gaps".

Send me a notification for each new answer.