4 Rifle/Shotgun & 3 Pistol Case

$632.45

Free ShippingFree Shipping* / prime eligible

x4 Rifles & Shotguns + x3 Pistols

Case will weight about 75 lbs loaded with guns

Padlockable (with customer supplied padlock)

Case Fits

  • Rifles & Shotguns (under 41" in Overall Length): Qty 4
  • Semi-Auto Pistols: Qty 3
  • Rifle Magazines: Qty 12
  • Silica Gel Canister (Included): Qty 1
  • Pistol Magazines: Qty 24+

Case Accommodates

  • Rifle & shotgun optics including scopes & red-dots
  • Rifle & shotgun foregrips including vertical foregrips and angled foregrips
  • Rifle & shotgun under barrel attachments including flashlights & lasers
  • Pistol optics
  • Pistol under barrel attachments
  • Grip fins & featureless rifles

Case Features

  • Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust
  • Case is 100% shippable and airline approved for TSA checked luggage
  • Two padlock points that support a customer supplied padlock with a 1/4" shackle
  • One way hinge pins ensure your gear remains safe and secure
  • Case has a lifetime warranty
  • 100% Waterproof (IP67) & Dustproof
  • Dual built-in pressure release valve
  • Wide bodied snap latches can be used with thick gloves
  • All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
  • Fully ATA approved and compliant in all 50 states
  • Carry handles on each end for a two person lift
  • Exterior document holder for product identification, handling instructions or destination details
  • Interlocking ribs allow the case to be stacked if you have more then one

Foam Features

  • Foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
  • Customizable lid hold down blocks that can be adjusted for each gun
  • Pistol foam spacer that can be removed to accommodate pistol under barrel attachments
  • Large magazine compartment with dual level foam spacers and foam lid
  • General storage area below rifle foregrips for gloves, gear and miscellaneous items
  • Perforations to deepen foam cradle so bullpups will fit

Case Will (Likely) Not Fit

  • Large side attachments
  • Bipods
  • Large bolts that stick out the side
  • Side by Side Barreled Guns

In stock

Categories: , , SKU: CC6084HXYWRIF4

Description

The Case Club 4 Rifle/Shotgun & 3 Pistol Case is engineered to provide secure, organized storage for up to four rifles or shotguns (each under 41 inches in overall length) and three semi-automatic pistols. Its custom-fabricated, pre-cut closed-cell polyethylene foam ensures a precise fit for each firearm, offering superior protection against impact, moisture, and oil. The foam design accommodates various firearm configurations, including optics, foregrips, under-barrel attachments, grip fins, and featureless rifles.

In addition to firearm storage, the case includes compartments for up to 12 rifle magazines and 24 or more pistol magazines, along with general storage areas for accessories. A rechargeable moisture-absorbing silica gel canister is included to help prevent rust, maintaining the condition of your firearms during storage and transport.

Constructed with durability in mind, the case is 100% waterproof (IP67 rated), dustproof, and features dual built-in pressure release valves, making it suitable for airline travel and shipping. Its injection-molded shell with integrated exterior structural ribs enhances durability and allows for stacking multiple cases. The case also includes two padlock points for added security, stainless steel latch and hinge pins, and wide-bodied snap latches that can be operated with gloves. Dual carry handles facilitate a two-person lift, and an exterior document holder provides space for identification or handling instructions.

Protect your investment, buy Case Club.

Disclaimer: This case has been specifically designed and tested for most standard-sized rifles, shotguns, and semi-automatic pistols. Firearms with oversized optics, extended controls, large side attachments, bipods, large bolts that protrude from the side, or side-by-side barrels may not fit properly. For the best fit and protection, use this case with firearms that fall within the listed dimensional guidelines.

 

4 Rifle/Shotgun & 3 Pistol Case - Features

Case Fits

Rifles & Shotguns (under 41" in Overall Length)Qty 4
Semi-Auto PistolsQty 3
Rifle MagazinesQty 12
Silica Gel Canister (Included)Qty 1
Pistol MagazinesQty 24+

Case Accommodates

  • Rifle & shotgun optics including scopes & red-dots
  • Rifle & shotgun foregrips including vertical foregrips and angled foregrips
  • Rifle & shotgun under barrel attachments including flashlights & lasers
  • Pistol optics
  • Pistol under barrel attachments
  • Grip fins & featureless rifles

Case Features

  • Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust
  • Case is 100% shippable and airline approved for TSA checked luggage
  • Two padlock points that support a customer supplied padlock with a 1/4" shackle
  • One way hinge pins ensure your gear remains safe and secure
  • Case has a lifetime warranty
  • 100% Waterproof (IP67) & Dustproof
  • Dual built-in pressure release valve
  • Wide bodied snap latches can be used with thick gloves
  • All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points
  • Fully ATA approved and compliant in all 50 states
  • Carry handles on each end for a two person lift
  • Exterior document holder for product identification, handling instructions or destination details
  • Interlocking ribs allow the case to be stacked if you have more then one

Foam Features

  • Foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil
  • Customizable lid hold down blocks that can be adjusted for each gun
  • Pistol foam spacer that can be removed to accommodate pistol under barrel attachments
  • Large magazine compartment with dual level foam spacers and foam lid
  • General storage area below rifle foregrips for gloves, gear and miscellaneous items
  • Perforations to deepen foam cradle so bullpups will fit

Case Will (Likely) Not Fit

  • Large side attachments
  • Bipods
  • Large bolts that stick out the side
  • Side by Side Barreled Guns

Product Specifications

Interior Dimensions41.50"L x 13.50"W x 12.00"H
(1,054mm x 343mm x 304.8mm)
Exterior Dimensions44.50"L x 16.50"W x 14.00"H
(1,130mm x 419mm x 356mm)
Shipping Weight31.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(14.06 kg)
CharacteristicsWaterproof, Shippable, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
Quantity of Long Guns4
Extended Titlex4 Rifles & Shotguns + x3 Pistols
SKU CC6084HXYWRIF4

4 Rifle/Shotgun & 3 Pistol Case - Videos

4 Rifle/Shotgun & 3 Pistol Case

4 Rifle/Shotgun & 3 Pistol Case - Video

Case Club Hydro Absorbent Silica Gel Video - Overview

Case Club Hydro Absorbent Silica Gel Video - Overview - Video

Customer Questions

  1. Q Will a Tavor Bullpup fit in this case? answer now
    Asked by Kevin on January 24, 2024 7:59 am
    Answered by the admin

    Yes. However be advised there are perforations cut into the foam that need to be removed in order to properly fit bullpups. The product video does a good job visually showing where those perforations are located. Once the perforations are removed they cannot be put back in so the spot would be permanently altered for the bullpup.

  2. Answered by the admin

    A 6.5 Creedmoor Bolt Action Rifle with foldable stock has not been tested in this case, but it is unlikely to work. Even though the the overall length might be with tolerance when folded, the stock itself will have no where to go. I think it could be possible to have the stock fold into the rifle holder next to it, but that could require foam modifications and will definitely lower the capacity from 4 to 3 long guns if it did work.

Send me a notification for each new answer.