3 Rifle & 1 Pistol Case


Free ShippingFree Shipping* / prime eligible

Fits 2 AR Carbine Rifles & 1 Longer Rifle

Holds Multiple Rifles (Up to 3)
Holds up to 14 standard & pmag (30-rd) magazines
Holds 1 pistol with 3 extra magazines
Allows Rifles to have forward (vertical) grip, laser or flashlight mounted directly under the rail (within 1.5″ in diameter & within 5″ tall)
Accommodates all major scopes & optics within a 3″ height
Max width of buttstock is 1.75″
Will not fit Barrel Tip Sights (unless customer modifies foam)
Extra accessory pocket for miscellaneous items
Case is 100% Waterproof, & Dustproof
Compact design leaves no wasted space. (Outside Case Dims. 45.10″L x 16.03″W x 12.97″D)
Case is crushproof
2 Hydro absorbent silica gel canisters included to prevent rust
Foam insert is (closed cell) military grade polyethylene which can be wiped clean
Case is padlockable with multiple locks
Manufactured in America

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Only 1 left in stock

Categories: , , , SKU: CC0471PERIF3PIS1


The 3 Rifle & 1 Pistol Case by Case Club holds up to 3 Rifles and 14 Magazines (both standard and pmag). Also holds 1 pistol and 3 pistol magazines. This universal insert holds one pistol, and the pistol’s quickdraw design allows for easy and fast access. It comfortably holds three rifles (see sizing diagrams) along with up to 14 magazines, so you can have quick access to your firearms on and off the range. This case was designed for versatility and for professionals. This waterproof case can accommodate all major optics including ACOG, AIM Point & more, provided they are within 3″ high. The rifle inserts have room for a front forward (vertical) grip, under-barrel laser and/or flashlight provided they are not wider than 1.5″. All the foam is military grade polyethylene which is oil proof, so if it gets dirty it can simply be wiped clean. The case itself is crushproof, waterproof, dustproof, shippable & has a lifetime warranty. A purge valve keeps the moisture out while allowing the case to be opened in high or low altitude, and each case includes two silica gel canisters to soak up moisture and keep everything rust free. Please note that the design has been updated, and the product will match the drawing.

Additional Information

Interior Dimensions42.50"L x 13.50"W x 12.00"H
(1,080mm x 343mm x 304.8mm)
Exterior Dimensions45.10"L x 16.03"W x 12.97"H
(1,146mm x 407mm x 329mm)
Shipping Weight31.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(14.06 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodInjection Molded
Manufacturing OriginUnited States of America
Quantity of Long Guns3
Extended TitleFits 2 AR Carbine Rifles & 1 Longer Rifle
ID 6947

Questions and answers of the customers

  1. Q Will the rifle cutouts be able to fit a shotgun or standard AK? answer now
    Asked by Jonathan on March 22, 2020 9:30 pm
    Answered by the admin

    Provided your guns are within the max length dimensions listed on the page then this case could potentially work. I am concerned the shotgun could potentially be too long. However if it isn't too long, there is something else to note in regards to the shotgun... Due to the fact this is a rifle case, the barrel cutout were made to rifle diameters. Knowing a shotgun barrel is a larger diameter than a rifle barrel you might have to make some cutout reliefs with a knife or blade on your end to fit it.

    I would say (assuming your guns are not too long) this case would get you 85%-90% there, but you would likely have to make some cutout reliefs to dial it in 100%. If you are not prepared to modify the foam then please do not purchase this case for your guns.

  2. Answered by the admin
    • The case holds up to 14 standard & pmag (30-rd) AR magazines
    • The pistol slot is compatible for a large revolver
    • This case comes with a thin (& long) accessory pocket in the front. It will likely not fit large pieces of gear like large earmuffs, but will fit smaller accessory items.
  3. Q Would the longest slot hold a Springfield M1A with a 22 inch barrel? answer now
    Asked by Tanner Shepard on July 28, 2019 5:43 am
    Answered by the admin

    Can you please measure the overall length of that rifle? If the overall length is between 35"-38.52" then it will fit.

  4. Q Will this fit an m16? answer now
    Asked by Larry on July 24, 2019 12:25 am
    Answered by the admin Assuming your M16 is standard length (39.5" overall), this case will not fit it in the current configuration. Technically the case shell is 42" long so the case itself would physically work, but the max overall length of rifle for this case is 38.5" (referring to the longest rifle cutout located close to the hinge). If however you were willing to omit the silica gel canister located in front of the barrel and extend the barrel cutout 1" through that area using a knife, then this case would fit an M16 rifle. It would be a minor & rather easy modification, but a "do-it-yourself" modification nonetheless. Extend the barrel cutout by 1" (shown in red) & a 39.5" long M16 rifle would fit.
  5. Answered by the admin

    For this product, we currently do not sell the foam separately from the case. This is mainly due to the specialized labor it takes to physically install the foam into the case. Also be advised this case shell is a Pelican 1740 Case & not the SKB 3I-4213-12 Case so this particular foam insert would not fit your case. The two cases are close in size, but vary enough to require different foams.

Send me a notification for each new answer.