Minelab Equinox 900 Metal Detector Case

$137.95

Free ShippingFree Shipping* / prime eligible

Padlockable (with customer supplied padlock)

Case Fits

  • Equinox 900 Metal Detector including:
  • Both the EQX|11 Coil & the EQX|06 Coil
  • 3 piece Shaft with attached Hand Grip Control Unit
  • Adjustable Handgrip
  • Factory Headset in Factory Protective Case
  • Plus more in the extra accessory pockets
  • Does not fit Equinox 600, 700, 800 models

Interior Foam Features

  • The metal detector only needs to be partially disassembled to fit into the case!
  • Either coil can be left attached to the end shaft piece, and also remain plugged into the control unit!
  • The other coil simply fits into the spare coil pocket
  • The adjustable handgrip has a dedicated pocket, and the headset case fits on top of the handgrip
  • The foam is closed cell polyethylene that can be wiped clean when it gets wet or dirty. It will NOT absorb liquids!
  • Foam is non-abrasive, will absorb impacts, and will not deteriorate over time

Case Features

  • Hard injection molded plastic shell protects from shocks, drops, impacts, and the elements
  • Padlock holes for added security
  • Exterior structural ribs for added strength

In stock

Categories: , SKU: CC6506FLEQUINOX

Description

The Case Club Minelab Equinox 900 Metal Detector Case is designed for secure storage and transport of your complete Equinox 900 setup. It precisely accommodates both the EQX|11 and EQX|06 search coils, the three‑piece shaft assembled with the control unit, adjustable hand grip, and the factory headset in its protective pouch. All additional accessories fit into the foam’s extra compartments. This case does not fit Equinox 600, 700, or 800 models.

Opening the case, users will find high-density closed-cell polyethylene foam cut to allow the detector to remain partially assembled. One coil can stay attached and plugged in, with the second coil fitting neatly in its own slot. The hand grip has a dedicated pocket, and the headset nests directly above. The foam repels liquids, resists abrasion, preserves shape over time, and absorbs impacts.

Structural ribs reinforce the shell, padlock-compatible latches add security, and a pressure equalization valve makes it air-travel ready. 

With interior dimensions of 30.75″ length by 11.87″ width and 5″ depth (exterior 32.5″ × 15.5″ × 6.25″), this case is compact enough for vehicle transport yet spacious enough for full detector assembly.

Disclaimer: This case was engineered for the Equinox 900 and its accessories. Use with other detector models or additional attachments may result in improper fit or reduced protection. This case is not waterproof.

Minelab Equinox 900 Metal Detector Case - Features

Case Fits

  • Equinox 900 Metal Detector including:
  • Both the EQX|11 Coil & the EQX|06 Coil
  • 3 piece Shaft with attached Hand Grip Control Unit
  • Adjustable Handgrip
  • Factory Headset in Factory Protective Case
  • Plus more in the extra accessory pockets
  • Does not fit Equinox 600, 700, 800 models

Interior Foam Features

  • The metal detector only needs to be partially disassembled to fit into the case!
  • Either coil can be left attached to the end shaft piece, and also remain plugged into the control unit!
  • The other coil simply fits into the spare coil pocket
  • The adjustable handgrip has a dedicated pocket, and the headset case fits on top of the handgrip
  • The foam is closed cell polyethylene that can be wiped clean when it gets wet or dirty. It will NOT absorb liquids!
  • Foam is non-abrasive, will absorb impacts, and will not deteriorate over time

Case Features

  • Hard injection molded plastic shell protects from shocks, drops, impacts, and the elements
  • Padlock holes for added security
  • Exterior structural ribs for added strength

Product Specifications

Interior Dimensions30.75"L x 11.87"W x 5.00"H
(781mm x 301mm x 127mm)
Exterior Dimensions32.50"L x 15.5"W x 6.25"H
(826mm x 394mm x 159mm)
Shipping Weight9.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(4.08 kg)
CharacteristicsOutdoor Use
HardwareNo Wheels, Padlockable, Hinged Lid
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
Manufacturing OriginUnited States of America
SKU CC6506FLEQUINOX

Minelab Equinox 900 Metal Detector Case - Videos

Minelab Equinox 900 Metal Detector Case

Minelab Equinox 900 Metal Detector Case - Video

Case Club CC6506FL Case

Case Club CC6506FL Case - Video

Customer Questions

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.