Case Club CC2700HP Case

From: $162.37

Inside Dimensions: 21.85"L x 18.07"W x 8.07"H

Exterior Dimensions: 24.29"L x 20.67"W x 8.94"H

Lid / Base Split: 1.77"Lid / 6.29"Base

Shipping Weight: 12.24 lbs

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Built in Pressure Equalization Valve


Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories.

It is available with a cubed foam or with an interior soft deck, or can be purchased empty.
• ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics
• automatic valve which automatically adjusts the air pressure inside
• internal O-ring made of neoprene PA66 makes the suitcase is totally waterproof
• Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall
• reinforced corners that make it extremely shock-resistant
• Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel.

Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of suitcases we find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company.
• Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An Case Club case used to extreme temperatures (hot or cold) does not lose its own distinctive features.
• The temperature range is guaranteed – 40 ° C – (40 ° F) up to + 80 ° C (+176 ° F).
All cases are watertight, resistant to dust, moisture, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. This case collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR.

The entire production line of these cases are ISO9001 confirming a particular attention and interest in maintaining a product at the highest level. These tests and certifications guarantee and certify the quality of the product line and its durability.

Product Specifications

Interior Dimensions21.85"L x 18.07"W x 8.07"H
(555mm x 459mm x 204.978mm)
Exterior Dimensions24.29"L x 20.67"W x 8.94"H
(617mm x 525mm x 227mm)
I.D. Lid/Base Split1.77"Lid / 6.29"Base
(45mm / 160mm)
Shipping Weight12.24 LBS (estimated weight of the product with packaging such as a cardboard box)
(5.55 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareNo Wheels, Padlockable, Hinged Lid, Pressure Equalization Valve
Manufacturing MethodInjection Molded
Manufacturing OriginItaly
Case MaterialPlastic
Case Interior No Foam | With Customizable Foam | With Padded Dividers

Customer Questions

  1. Q With this case hold an Epson G6050m The dimensions are 20”x16”x6”. answer now
    Asked by Daniel Langley on September 2, 2018 1:14 pm
    Answered by the admin

    Based on the dimensions of the Epson G6050m, the case will physically fit the projector. In fact you could expect a very compact & desirable sized transport case when done. The only thing which could be negative & you should consider are hand reliefs & accessory cutouts. This case would have 0.925" padding on the length end & 1.03" of padding on the width. It will function fine, but that little amount of padding may make it difficult to remove the projector out of the foam. A user could struggle to remove the projector not being able to get their hands around it. Also don't expect any extra room for lenses cords or other accessories.

Send me a notification for each new answer.