Parallel Limb Bow Case

$298.95

Free ShippingFree Shipping* / prime eligible

Fits Compound Bows up to: 40"x 13.4"

Padlockable (with customer supplied padlock)

Case has a Lifetime Warranty

Case Features

  • Fits bows up to 40" in total length and 13.4" in total width (see reference diagram)
  • Fits up to 12 arrows
  • Foam keeps arrows stationary, slowing deterioration (especially in the fletching)
  • Built in pressure release purge valve
  • Carry handle and tote wheels for easy transportation
  • Hydro absorbent silica gel canister included to help prevent rust
  • Waterproof accessory box included for your small items
  • Case is Airline Approved for checked luggage

Case Does Not Fit

  • Quivers
  • Large hunting sights greater than 1" away from the bow riser will protrude into the arrow compartment (HHA Tetra, HHA Optimizer, ect)

In stock

Categories: , SKU: ASSYCC1530SEBOW

Description

Case Club’s rugged, durable, injection molded, waterproof, Parallel Limb Bow Case is second to none in terms of archery equipment protection, and the best hard bow case on the market today. The case comes with a soft cushion of convolute foam to keep your bow from moving while in transit. Special arrow holders in the lid help keep arrows stationary while on the go, which will increase the life of the fletching. The case itself offers maximum protection, and won’t split, splinter, crack, or rust over time. It has a pressure equalization valve for changing altitudes, and comes with a waterproof accessory box to store your smaller items. The case also comes with moisture absorbing silica gel to help keep items rust free, and the foam is military grade closed cell polyethylene that is cut to fit almost any parallel limb bow that is 40″ or less end to end (see reference image). This case is capable of holding up to 12 arrows, with each arrow in its own individual slot. Not longer will your arrows rattle around and deteriorate quickly while in transit and storage. The case is heavy duty enough to ship or check on an airplane and can handle all the abuse from TSA agents. Padlockable holes are also built right in, which can take standard sized Masterlocks so you can be guaranteed this case is safe & secure. Protect your investment, buy Case Club.

Parallel Limb Bow Case - Features

Case Features

  • Fits bows up to 40" in total length and 13.4" in total width (see reference diagram)
  • Fits up to 12 arrows
  • Foam keeps arrows stationary, slowing deterioration (especially in the fletching)
  • Built in pressure release purge valve
  • Carry handle and tote wheels for easy transportation
  • Hydro absorbent silica gel canister included to help prevent rust
  • Waterproof accessory box included for your small items
  • Case is Airline Approved for checked luggage

Case Does Not Fit

  • Quivers
  • Large hunting sights greater than 1" away from the bow riser will protrude into the arrow compartment (HHA Tetra, HHA Optimizer, ect)

Product Specifications

Interior Dimensions44.50"L x 14.29"W x 6.22"H
(1,130mm x 363mm x 157.988mm)
Exterior Dimensions46.60"L x 16.72"W x 6.83"H
(1,184mm x 425mm x 173mm)
I.D. Lid/Base Split1.71"Lid / 4.51"Base
(43mm / 115mm)
Shipping Weight23.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(10.43 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareWheels (Tilt Wheels), Padlockable, Hinged Lid, Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodPrecision Cut, Injection Molded
Manufacturing OriginUnited States of America
Extended TitleFits Compound Bows up to: 40"x 13.4"
SKU ASSYCC1530SEBOW

Parallel Limb Bow Case's Pre-cut Template

Customer Questions

  1. Answered by the admin

    We require a minimum quantity of 10 to modify an insert or create a new one so that option is likely off the table. This case has a base depth of 4.51" (top of the base to the bottom plastic). However we have glued 2.25" thick convolute foam at the bottom, so the total "air space" is about 2.26". With that said the convoluted foam at the bottom is intended to compress up to 1", so usable area is around 3.25" total.

    The lid on the other hand is 1.71" deep total. The lid has a lot going on, but you will note the foam pretty much comes right up to the lip so the whole thickness of the lid is filled with foam.

  2. Q Does the case have wheels and handle? answer now
    Asked by larry on January 14, 2021 2:45 pm
    Answered by the admin Yes, this case has wheels and a handle on the side to pull it. (it also has a handle in the front to carry it).
  3. Answered by the admin

    As soon as the canister is taken out of the sealed bag it will begin to function.

    After that, the directions to the silica gel canister are actually stamped right into the tin on the outside. In short there is a window in the middle of the canister in which you can see the bead's color on the inside. The beads will start one color and as they absorb moisture overtime change to a different color. Once the beads are saturated the whole canister can be popped into an oven and baked for 3 hours at 350F which will remove the moisture and rejuvenate the beads (changing them back to their dry color). Assuming you follow the directions on the outside of the tin, the rejuvenation process can be done indefinitely. The time it takes for the beads to change color and require an oven bake will heavily depend on how humid the environment is. If you are asking from Florida you can expect to do this process often while an Arizona resident may never have to.

  4. Answered by the admin

    Yes, we can build a custom case based on this design. Be advised the cost will be more due to the custom engineering involved. Email sales@caseclub.com for more information on the cost and how to get started.

  5. Answered by the admin

    This case has no Velcro straps. The bow is held in place by convolute foam on each side of the lid which holds down the axles.

  6. Q Will this case hold my specific bow model? answer now
    Asked by Ryan on July 9, 2018 11:02 am
    Answered by the admin Although we no longer maintain a list of specific bow models that fit into our various archery cases (upkeep on the list was too time intensive), we do have a Dimension Diagram on this page that can be used to cross reference a bow's dimensions to ensure fit.

Send me a notification for each new answer.