3 Pistol & Accessory Case (Gen-2)

From: $114.94

Free ShippingFree Shipping* / prime eligible

Semi-Autos Only

Case has a Lifetime Warranty

Padlockable (with customer supplied padlock)

Case Features

  • Comes with magazine modules that can be taken out to create an accessory pocket or left in place for magazine storage
  • Case is high-strength polypropylene
  • Hydro absorbent silica gel canister included to help prevent rust
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage
  • Fits under-barrel attachments and small red dots
  • Quick draw design is compact and leaves no wasted space
  • Max length of pistols is 8 5/8"
  • Not intended for revolvers. (See our 4 Revolver & Accessory Case which properly fits revolvers)

Case will hold up to 3 pistols &...

  • 9 magazines with the magazine modules removed, or...
  • 17 magazines with 1 magazine module, or...
  • 23 magazines with both magazine modules

Gen-2 upgrades include

  • Dual magazine modules that can be taken out for accessory storage or left in place for magazine storage
  • Length & height adjustment blocks built into the foam to for properly fitting compact and sub-compact guns
  • Wide bodied snap latches that can be used with gloves
  • Front handle length increased to help counter balance off center weighted loads
  • Orange peel texture added to exterior finish to minimize scratches
  • All latch pins, hinge pins, & handle pins upgraded from plastic to steel
  • Exterior structural ribs added for durability
Categories: , , , SKU: ASSYCC171163ISKPIS3A

Description


The 3 Pistol & Accessory Case by Case Club holds 3 semi automatic handguns and up to 23 additional magazines of various sizes. It is ideal for firearms training classes, police departments, gun enthusiasts, and anyone looking to transport their firearms. For those who need to transport & store their handgun safely, there is no better option than the 3 pistol & accessory case. This universal insert holds various sized pistols for versatility and convenience, and its quickdraw design allows for easy and fast access to the pistols. The foam is a tough military grade polyethylene that will hold up to constant use. The case itself is guaranteed for life against breakage & defects so you know your pistols will be safe for years and even decades to come. This case includes an ever-important moisture-absorbing silica gel to help keep pistols rust free. Extra accessories for the case are recommended below, for those looking to further beef-up or monitor this excellent pistol case.

3 Pistol & Accessory Case - Features

Case Features

  • Comes with magazine modules that can be taken out to create an accessory pocket or left in place for magazine storage
  • Case is high-strength polypropylene
  • Hydro absorbent silica gel canister included to help prevent rust
  • Foam insert is (closed cell) military grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage
  • Fits under-barrel attachments and small red dots
  • Quick draw design is compact and leaves no wasted space
  • Max length of pistols is 8 5/8"
  • Not intended for revolvers. (See our 4 Revolver & Accessory Case which properly fits revolvers)

Case will hold up to 3 pistols &...

  • 9 magazines with the magazine modules removed, or...
  • 17 magazines with 1 magazine module, or...
  • 23 magazines with both magazine modules

Gen-2 upgrades include

  • Dual magazine modules that can be taken out for accessory storage or left in place for magazine storage
  • Length & height adjustment blocks built into the foam to for properly fitting compact and sub-compact guns
  • Wide bodied snap latches that can be used with gloves
  • Front handle length increased to help counter balance off center weighted loads
  • Orange peel texture added to exterior finish to minimize scratches
  • All latch pins, hinge pins, & handle pins upgraded from plastic to steel
  • Exterior structural ribs added for durability

Product Specifications

Interior Dimensions14.60"L x 10.50"W x 6.00"H
(371mm x 267mm x 152.4mm)
Exterior Dimensions16.75"L x 12.62"W x 6.75"H
(425mm x 321mm x 171mm)
Shipping Weight9.00 LBS (estimated weight of the product with packaging such as a cardboard box)
(4.08 kg)
CharacteristicsWaterproof, Shippable, Lifetime Warranty, Crushproof, Outdoor Use
HardwareNo Wheels, Padlockable, Hinged Lid, Pressure Equalization Valve
Case MaterialPlastic
Manufacturing MethodInjection Molded
Quantity of Pistols3
Pistol TypeFits Semi-Autos
Extended TitleSemi-Autos Only
Version Standard Version | Lighted Version
SKU ASSYCC171163ISKPIS3A

3 Pistol & Accessory Case (Gen-2) - Videos

3 Pistol & Accessory Case (Gen-2)

3 Pistol & Accessory Case (Gen-2) - Video

Case Club Hydro Absorbent Silica Gel Video - Overview

Case Club Hydro Absorbent Silica Gel Video - Overview - Video

Lighted Case Setup & Operating Instructions

Lighted Case Setup & Operating Instructions - Video

Customer Questions

  1. Q Can I get this case in yellow? answer now
    Asked by Mark Hines on June 17, 2022 1:23 pm
    Answered by the admin

    Negative. This case is only offered in black.

  2. Answered by the admin Yes. This case is heavy duty and 100% TSA compliant. Just be sure to bring 2 padlocks so you can lock it before checking it.
  3. Answered by the admin It sounds like your thought is, if the gun length is shorter theoretically it might be less tall and could fit. Here is your definite answer... If you put the gun on your table so the barrel and grip are touching, what is the measurement from the table top to the top of the gun? This case is physically 6" in height on the inside. If you are coming in under 6" than it would be tight, but should work. If you are over 6" still than nothing you could do would make this gun fit as the physical case is just not deep enough.
  4. Q Will trigger locked handguns fit in the case? answer now
    Asked by Vinh on May 4, 2020 11:56 pm
    Answered by the admin

    No, trigger locked handguns will not fit in this case. The trigger lock is too wide.

  5. Q Can this case fit extended mags? answer now
    Asked by Quinten Broeckx on September 4, 2019 11:42 am
    Answered by the admin

    This particular case is on the thinner side and would not hold extended magazines. Some of our larger pistol cases which are deeper such as the 8 pistol case as one example could hold extended mags.

  6. Q What is the difference between Case Club and the Pelican? answer now
    Asked by Dr Kevin Flythe on August 20, 2019 11:04 am
    Answered by the admin The Case Club case meets all the same mil-specs as the Pelican (waterproof, automatic purge valve, ect). In fact the latches on the Case Club are easier on your fingers then the Pelican. The main difference is simply the name and some customers in the market would prefer to pay more for that name which is why we currently have that option.
  7. Answered by the admin

    This gun case is only offered in this configuration. Be advised, it is waterproof with a lifetime warranty. It also meets all military specifications for a reusable, chemical resistant shipping case. From a quality standpoint is top of the line.

Send me a notification for each new answer.